T308+™ Epoxy Adhesive Adhesive Installation Accessories Chem-Stud® Installation Tools



Cartridge System Nozzle

Powers mixing nozzles for 1:1 ratio cartridges have a premounted nut and a unique break away extension tip. This unique design allows one nozzle to be used with all anchor hole sizes. On small jobs, anchor holes as small as 5/16" in diameter and 6" in depth can be easily filled. For larger jobs, the nozzle can reach a depth of up to 14" in anchor holes 11/16" and larger. For deeper holes, use the extension tubing listed in the Installation Accessories section.

Call for Pricing


T308+ Pnuematic Dispensing Tools

Designed to be used on large volume jobs to deliver maximum productivity. The main cylinder is formed using top quality aluminum to provide a lightweight, durable tool. The dispensing trigger is designed to provide instant pressure relief from the cartridge which reduces waste. The tool also has a reverse button for fast and easy removal of cartridges during use.

Call for Pricing


AC100+Gold® Adhesive

The AC100+ Gold is a two-component vinylester adhesive anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment. The AC100+ Gold is designed for bonding threaded rod and reinforcing bar into hardened concrete and masonry. Evaluated for use in dry and water-saturated concrete inclucing water filled holes. Suitable to resist structural loads in uncracked concrete base materials for cases where anchor design theory and criteria applies Can be installed in a wide range of base material temperatures

Code Listed ICC-ES ESR-2582

Call for Pricing



Nylon Brushes

Used to aid in the preparation of the anchor hole.

Call for Pricing


Battery Injection Dispensing Tool

High performance battery tool, 22oz. battery, and charger included.  Fits T308+ 21.5 oz cartridge.

Call for Pricing


Blow Out Pump

Blow out pump can be used for any epoxy application. Minimum hole size 7/16".

Call for Pricing



Anchor Seal Plugs

The following anchor seal plugs are designed for use with anchor installations in ceilings and wall applications. The plugs help retain the adhesive in the anchor hole and hold the anchor rod centered in the hole until the adhesive sets. The plugs are described by the anchor rod diameter they are used with and will fit the hole size indicated when it is drilled with a bit meeting the requirements of ANSI Standard B212.15.

Call for Pricing


Stainless Steel Screen Tubes

Screen tubes are made from a 300 series stainless steel. The nominal diameter of the screen listed indicates the matching rod diameter.

Call for Pricing




Call for Pricing



Call for Pricing



Call for Pricing



Call for Pricing



Base Material: Solid Concrete
Size Range: 3/8" to 1" anchor rod, No. 3 to No. 8 reinforcing bar
Anchor Material: Ester Based Resin
The Hammer-Capsule System consists of a self contained, single use, two-part glass capsule into which threaded anchor rod or reinforcing bars can be directly driven without the need for a chisel point or spinning action. It is designed for use in the installation of 3/8" through 1" diameter threaded rod in solid concrete and masonry materials. It can also be used to install reinforcing bars.

Hammer-Capsule® Selection Guide

Call for Pricing


Chem-Stud® Spin Type Capsule Adhesive

Base Material: Solid Concrete
Size Range: 3/8" to 1 1/4" anchor rod, No. 3 to No. 10 reinforcing bar
Anchor Material: Ester Based Resin
The Chem-Stud Anchor System consists of self contained two-part glass capsules and matching chisel pointed anchor rods which are installed using a rotary hammer drill and rod adapters. The Chem-Stud adhesive is an ester based resin material packaged in single use glass capsules. These are designed for use in the installation of 3/8" through 1 1/4" threaded rod in solid concrete and masonry materials. It can also be used for reinforcing bars.

Chem-Stud® Selection Guide
The following tables list the available capsule sizes along with three
types of pre-cut chisel-pointed anchor rod.

Chem-Stud® Capsules

Call for Pricing


T308+ Epoxy Adhesive

Call for Pricing


Red Head Epcon A7 Acrylic Adhesive

A7 is a fast dispensing, fast curing acrylic adhesive used for anchoring threaded rod or rebar into concrete, brick or block substrates, hollow or solid. The acrylic resin and hardening agent are completely mixed as they are simultaneously dispensed from the dual cartridge through a static mixing nozzle, directly into the anchor hole. A7 is an all weather formula adhesive that is pumpable at 0° F without preheating. A7 can be used in damp or underwater applications as well. Dispensing the adhesive is fast and easy, and rods embed easier into A7 as compared with other products on the market. A7 also features fast curing times (i.e. 35 minutes @ 60°).

Call for Pricing

«« Start « Prev 1 2 Next » End »»

Display Results per Page

Results 1 - 20 of 25