test

DRYWALL PRODUCTS



P15-7000

AutoPro™ Automated Drywall Corner System

AutoPRO Automated drywall corner system uses LevellinePro to produce ready-to-install corners with joint compound applied, cut to any length.   Portable and lightweight, easy to maneuver.  Pre-cut stick lengths and roll products with one simple 250’ roll (15-7001).  Easy-to-use keypad simplifies operation and stores custom measurements. 5-gallon hopper is easy-to-fill, clean and cap for overnight mud storage.  Powered by 110 volts.

Call for Pricing


P15-7001

LevellinPRO™ Drywall Corner Trim

Forms outside / inside 90° and off-angle corners.  Durable – won’t crack or dent.  Tapered profile makes finishing fast and easy.  Permanently bonds corner to drywall; accepts any finish.  For faster installations, use with AutoPro Automated Drywall Corner System (Item 15-7000).  3.75” x 250’ rolls.

Call for Pricing


P15-7002

Hydrotrim® Outside 90

Hydrotrim outside 90° is ideal for use with all outside corners.  Also opens to a 135 degree corner or adjusts to any outside angle.  Hydrotrim is an easy-to-apply corner that does not blister, bubble, dent or crack.  Hydrotrim’s patent-pending design includes a water-activated adhesive and punch holes that allow joint compound to further bond the corner to the drywall.  Fast and easy to apply – simple spray with water, press on.  No screws, staples or messy adhesive spray needed.  Water-activated adhesive creates an indestructible bond to drywall; perforated holes allow joint compound to permanently seal corner to wall.

Call for Pricing


P15-7004

Levelline® Drywall Corner Trim

Levelline’s tapered profile design eliminates installation headaches and callbacks. Installing off-angles, inside and outside corners is faster and easier with LEVELLINE’s tapered flex design and new application box.  Corner flex goes straight from the box or roll onto the wall, and requires less mud to apply and finish. Superior corner trim construction (tapered plastic core, joint tape and formulated surface paper) ensures drywall corners will not split or dent. LEVELLINE’s can also withstand structural settling from green lumber and seismic movement without cracking of popping off the wall.

Call for Pricing


P15-7007

Ultratool® Rollers

Ensure high speed, accurate installations.  Highly durable.  Squeezes out excess mud.  Taper matches exact corner profile for the maximum bond with the minimum amount of mud.  Stainless steel rollers with Nylatron and brass brushings.  Stainless steel frame and hardware.

Call for Pricing


P15-7008

No-Coat® Double Barrel Hopper

No-Coat® double barrel hopper is set up for all angles, all the time.  Install off-angles, inside 90's, bullnose, and outside 90's in record time.  No time-consuming adjustments or extra hardware necessary.  Ensures a uniform and high-speed installation.  Single piece gates with ergonomic hand knob allow for fast and easy adjustments.  High-density polyurethane tank and gate controllers.  Stainless steel reservoir trough and gates.

 

Call for Pricing


P15-7009

Hydrotrim® Rollers

Ensure high speed, accurate installations.  Highly durable, squeezes out excess mud.  Taper matches exact corner profile for the maximum bon with the minimum amount of mud. Black rubber rollers.

Call for Pricing


P15-7010

Multi-Purpose Sprayer

For industrial use, this hand held two-liter compression sprayer features an adjustable poly cone spray nozzle.  Translucent lightweight poly tank features easy grip handle with locking thumb-operated trigger and easy pump on sprayer handle.

Call for Pricing


P15-7011

No-Coat® Ultratrim® L Trim

Ultratrim® L Trim drywall corner trim is perfect for trimming ceiling, window or doorjamb corners.  No masking required.  Strong enough to float ¾” past end of drywall.  Large flange works on gaps up to 1”.  SLAM™ corner design ensures strength, durability, labor and material savings.

Call for Pricing


P15-7013

No-Coat® Ultratrim® Outside 90

Pre-cut to standard lengths ensures installations are fast and efficient.  Requires less skill for perfect results.  SLAM™ corner design ensures strength, durability, labor and material savings.  50 pcs.

Call for Pricing


P15-7017

No-Coat® Ultraflex® 325

Finishes short run off-angles of any length with straight, precise lines.  Built-in flexible hinge adjusts to fit any inside or outside corner angle.  Flange width hides irregular framing.  SLAM™ corner design ensures strength, durability, labor and material savings.

Call for Pricing


P15-7018

No-Coat® Ultraflex® 450

Extra stiff profile provides easy application for long spans.  Wide flange covers large gaps and poor framing.  Built-in flexible hinge adjusts to fit any inside or outside corner angle.  SLAM™ corner design ensures strength, durability, labor and material savings.

Call for Pricing




Results 1 - 12 of 12