Fein Turbo II Accessories Accessories For Porter Cable Wet/Dry Vacuums Ruwac Vacuum Accessories
Mastercraft® CT 5 Accessories


Fein Turbo I Set

Compact wet and dry vacuum cleaner with connection for power tools during workshop and installation use and extensive accessory set.  High performance turbine for 151 cfm (71 l/s) flow rate and 98.4" of water lift (245 mbar vacuum).  Low volume of 66 dB (A). large range due to 19 ft power cord and 13 ft vacuum hose. Large wheels rotate 360° for optimal maneuverability, even in tight conditions.  Tool coupling with suction control for easy control of suction power.  Autostart outlet with power-on delay to prevent current spikes.  Practical storage area with rim.  Approval for dust class L.

Call for Pricing


Fein Turbo II Vacuum

Powerful wet and dry vacuum cleaner for connecting power with high performance turbine for 151 cfm flow rate and 98.4" of water lift.  Low volume of 66 dB (A).  Large range due to 19 ft power cord and 13 ft vacuum hose.  Large wheels rotate 360° for optimal maneuverability, even in tight conditions.  Tool coupling with suction control for easy control of suction power; autostart outlet with power-on delay to prevent current spikes.  Practical storage area with rim.  Weight: 20.1 lbs. Includes:  suction hose 13’x 1-3/8” dia., tool coupling with suction control, filter (25-0262 HEPA filter) and filter bag.



Call for Pricing


Fein Turbo II Accessories

Call for Pricing


Fein Accessory Set

Includes: (2) metal extension tubes, combination tool with interchangeable inserts, crevice nozzle, dusting brush, and elbow.

Call for Pricing


DeWalt 8 Gallon Wet/Dry HEPA Dust Extractor

Automatic Filter Clean pulses every 30 seconds for continuous operations without stopping to clean filter.  Powerful 15 amp motor delivers 150 CFM of airflow for maximum suction.  Power tool actuation controls the On/Off operations of the vacuum with a power tool.  Meets the EPA Lead Related Renovations, Repair and Painting (RRP) Rule for Hepa Vacuum only when DWV9330 filters are used (included).  Lightweight and portable weighing in at only 21 lbs.  Heavy-duty casters provide jobsite durability.  Includes:  (2) hepa filters, anti-static hose, and fleece bag.

Call for Pricing


DeWalt Wet/Dry HEPA Vacuum

Designed to be used with the Model 7800 (Item 10-1209) Drywall Sander, this HEPA vacuum can be used for general wet/dry clean up as well. Automatic filter clean pulses every 30 seconds for continuous operations without stopping to clean filer. Built-in outlet for power tool...vacuum starts and stops automatically when tool is turned on or off, with a 15 second vacuum overrun to clear hose when tool is turned off. Corrosion resistant polypropylene tank. Powerful 15 amp motor. Meets EPA Lead Related Renovations, Repair and Painting rule for Hepa Vacuum only when 10-2685 Hepa filter is installed.  10 gallon capacity. 15' cord.

Call for Pricing


Bosch Dust Extractor with Automatic Filter Clean

Automatic filter cleans filter every 15 seconds to maintain maximum suction power.  Power tool activation allows power tool's switch to turn vacuum on and off.   Power Broker™ dial allocates power between vacuum and connected power tool allowing suction control for specialty applications.  EPA lead Related Renovations Repair and Painting (RRP) rule compliant when 25-0280 filter is used.  Wet vacuuming water level sensor automatically shuts down vacuum when water reaches a maximum height to protect motor.  Rugged construction / polypropylene tank - durable and rust free.  Rubber wheels and locking caster are built to withstand the demands of a jobsite.  Includes: 10 ft. Vacuum Hose, Bend Nozzle, Power Tool Adapter Nozzle, Cellulose Flat Filter, Plastic Bag (1 Bag).

Call for Pricing


Metabo 1400 Watt Vacuum

For hard continuous use during grinding, milling, drilling and cutting jobs.  AutoClean offers permanent filter cleaning for always clean filter without interrupting work.  Suitable for extracting dust and solid particles, and for absorbing non-flammable liquids.  Automatic shutoff that is disconnected while absorbing the suction flow as soon as the maximum filling height of the container is reached. Large wheels and castors with wheel stop.  Sturdy and washable pleated filter. 9 gallon capacity.  Includes suction hose, 2 polyester filter cassettes and PE filter bags.

Call for Pricing



Ermator S26 Single-Phase HEPA Dust Extractor

Ermator HEPA Dust Extractor is equipped with tested and certified HEPA filters that trap the smallest, most dangerous-to-breath dust particles and prevents them from being released in the air. A HEPA Dust Extractor not only exhausts perfectly clean air, it is far more efficient for the fast recovery of bulk dry dust, debris and other building materials found on every Construction, Abatement and Restoration job site. It can also be connected to electrical power tools to extract the freshly cut and friable concrete dust, considered to be the most hazardous to construction workers. It can handle building, grinding, plaster and concrete dust.  It is equipped with a fine filter and an H13 filter that meets the asbestos requirements. Jet Pulse system efficiently purges the pre-filter to maintain airflow, without opening the vacuum and creating a dust hazard.  10’ large non-marking, puncture-free rear wheels and locking front caster allow for smooth, easy transport over power cords and other floor obstructions. Unique Lonopac® is a 72’ long plastic tube that can be separated into approximately 25 individually sealed bags for fast, safe handling and disposal of dust.  Includes: 2” x 25’ hose assembly, metal wand, floor tool and box on Longopacs.

Call for Pricing


Pullman Holt Big Red Wet Dry 55 Gallon Drum Vacuum

Popular 2-hp, 2-stage long-life motor sits atop a steel drum to create the ultimate in vacuum recovery.  Features an unsurpassed 55 gallons in wet recovery and 7.2 bushels of dry capacity.  Offers superior vacuum recovery, ranging from dry, light particulates, to wet, heavy debris.  Steel dolly features four each 3” non-locking casters.  Equipped with a 2-stage, 2-hp bypass motor, the Big Red Wet/Dry Vacuum is ideal for heavy-duty service with fast pick-up of most dirt, litter, soot and liquids.  Includes a heavy duty tool kit: crushproof hose assembly, steel double bend wand, floor brush, crevice tool and dusting brush.

Call for Pricing


Mastercraft® CT 5 Hepa Vacuum

Enviromaster® professional grade HEPA vacuum. Compact vacuum is easy to transport, and works well in small and confined areas. 1.3 HP by-pass motor develops 94 CFM. Minimum efficiency rating of 99.97% at 0.3 microns. High impact plastic tank with no-tip base, and four 2 1/2" swivel casters. Comes with HEPA filter, disposable paper filter bag (5/pk), and intermediate pre-filter (2/pk). Accessories include: 2 pc. 1 1/4" aluminum wands, 6" upholstery tool, 10' vinyl hose, 1 1/4" swivel hose connector, 9" crevice tool, 3" round dusting brush, 10" floor tool, and 12" combination floor tool.

Call for Pricing


Dust Hoods

Patented design for capturing dust when cutting with an angle grinder.  Aerodynamic, ergonomic shape allows full visibility when cutting and unique and patented design for maximum particle capture.  Easy to remove cover to change blades.  Designed to work efficiently with 25-0155 (one operator) and 25-0157 (two operators).  Made for Tuck Pointing, Crack Chasing and Joint Cutting

Call for Pricing


Ruwac 2 Tool Dust Extractor

This heavy duty, high quality vacuum will deliver 99.9% efficiency at 0.5 microns while 2 users tuck point with 5” grinders and 50’ long hoses! Ruwac’s filter technology insures no premature filter clogging thereby increasing productivity and keeping filter replacement to a minimum. The unique foot activated drop down dustpan not only makes removal of concrete dust fast and easy, but eliminates the need to purchase costly dust bags. Vacuum housings are made of compression cast composite and will never dent or rust. The machine’s low center of gravity makes it virtually impossible to be accidentally tipped over. 2” output.

Call for Pricing


Deluxe 5" Dust Shroud

The attachment collar with multiple rings supplied with shroud allow the dust shrouds to be attached to every common hand grinder.  Easily slide the appropriate spacer ring onto the grinder, slide the shroud onto the spacer and set your height and tighten the clamp. They comply with EPA regulations covering lead paint removal and silica dust control. Features a swivel for easy attachment of 1.5” and 2” hoses.

Call for Pricing

Results 1 - 15 of 15