ADHESIVE ANCHORS



P99-9255

PURE220+™ Epoxy Injection Adhesive Anchoring System

The Pure220+ is a two-component, high strength adhesive anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment. Pure220+ is designed for bonding threaded rod and reinforcing bar hardware into drilled holes in concrete base materials and for post-installed reinforcing bar connections (rebar development). It can also be considered for other applications in concrete and masonry such as anchor bolt repairs, filling abandoned holes and large cracks.

 

 

Call for Pricing


P99-8540

AC200+™ Acrylic Injection Adhesive Anchoring System

The AC200+ is a two-component, high strength adhesive anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment. The AC200+ is designed for bonding threaded rod and reinforcing bar hardware into drilled holes in concrete base materials.   Comparable to Hilti® HV200.

Call for Pricing


P99-8480

AC100+Gold® Adhesive

The AC100+ Gold is a two-component vinylester adhesive anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment. The AC100+ Gold is designed for bonding threaded rod and reinforcing bar into hardened concrete and masonry. Evaluated for use in dry and water-saturated concrete inclucing water filled holes. Suitable to resist structural loads in uncracked concrete base materials for cases where anchor design theory and criteria applies. Can be installed in a wide range of base material temperatures; qualified for installation structural applications in concrete as low as 14°F.

Code Listed ICC-ES ESR-2582

Call for Pricing


P99-8293

AC100+ Cartridge System Mixing Nozzle

Fits cartridge sizes: 5 oz, 8oz, 10 oz, and 12 oz.

Call for Pricing


P99-0831

Pure110+™ Epoxy Injection Adhesive Anchoring System

The Pure110+ is a two-component, high strength adhesive anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment. The Pure110+ is designed for bonding threaded rod and reinforcing bar hardware into drilled holes in concrete and masonry base materials.  Pure110+ has the same bond strength at room temperature and at 110ºF. Evaluated for installation and use in dry and wet holes, including water filled and underwater.  Can be installed in a wide range of base material temperature. Conforms to requirements of ASTM C 881, Types I, II, IV and V, Grade 3, Classes B & C (also meets Type III except for elongation). Evaluated and qualifi ed by an accredited independent testing laboratory for recognition in cracked and uncracked concrete including seismic and wind loading.z

 

Call for Pricing


P99-8403

Pure50+ Epoxy Injection Adhesive Anchoring System

The Pure50+ is a two-component adhesive anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment. The Pure50+ is designed for bonding threaded rod and reinforcing bar hardware into drilled holes in solid concrete base materials.   Suitable for use in dry, wet and water-filled holes.  One mixing nozzle included with each cartridge.

Call for Pricing


P99-8437

Dispensing Tools

Call for Pricing


P99-7931

Nylon Brushes

Used to aid in the preparation of the anchor hole.

Call for Pricing


P99-8542

Cordless Injection Dispensing Tool

Productive up to 24 tubes per battery charge at room temperature.  Dosage metering dial for repetitive dispensing in same size holes.  Speed dial for dispensing versatility.  20V max battery system.

Call for Pricing


P99-7944

Blow Out Pump

Blow out pump can be used for any epoxy application. Minimum hole size 7/16".

Call for Pricing


P99-8282


P99-7861

Stainless Steel Screen Tubes

Screen tubes are made from a 300 series stainless steel. The nominal diameter of the screen listed indicates the matching rod diameter.

Call for Pricing


P99-8494

99-8494

Call for Pricing


P99-8498

Ac100+ Gold Extra Mixing Nozzle w/ 8" Extension

Extra Mixing Nozzle (with 8'' Extension) For AC100+ Gold 28 Oz.

Call for Pricing


P15-1643

Red Head Epcon A7+ Quick Curing Epoxy Adhesive

Red Head A7+ is a high-strength, fast-cure adhesive that is designed to securely anchor threaded rod and rebar to cured concrete and masonry.  A7+ is one of the most versatile anchoring solutions on the market, suitable for use in an extremely wide range of applications and environmental conditions. Qualified for use in concrete, grout-filled and hollow block, brick, and clay tile.  Cures in only 45 minutes (at base temperature of 70F).  No extra time required for drying saturated concrete or water-filled holes.  Easy pumping even in cold temperatures.  Low odor therefore is suitable for use indoors and in occupied buildings.  Rugged, re-sealable cartridge resists breakage due to rough handling or cold temperatures.

Call for Pricing


P97-0004

Epcon A7 Dispensing Tools

Call for Pricing


P15-1646

Red Head C6+ High Strength Epoxy

Red Head C6+ is the highest strength adhesive in our history. Designed for use in the most demanding anchoring applications, the maximum strength of Red Head C6+ is backed by ICC-ES approvals for both concrete and masonry.  It is also the only adhesive approved for core-drilled holes in cracked concrete without the use of a roughening tool.  At least 25% stronger than the old C6+ formulation for threaded rod in cracked concrete with seismic conditions.  Fastest Cure time in its class, curing in just 2.75 hours at 90°F and in only 2 hours at 110°F!  ICC-ES approved for cracked concrete and seismic applications (ICC-ES ESR 4046).  Can be used down to 40°F and up to 110°F.  Can be used in oversized holes.  Rugged cartridges resist breakage due to rough handling or cold temperatures.  24-month shelf life.

Call for Pricing


P97-0015


P26-0093

SET-XP® High-Strength Epoxy Adhesive

SET-XP® epoxy anchoring adhesive is a high-strength formula for anchoring and doweling in cracked and uncracked concrete and masonry applications. It is a two-part system with the resin and hardener being simultaneously dispensed and mixed through the mixing nozzle. When properly mixed, adhesive will be a uniform teal color for easy post-installation identification. Cure times: 24 hours at 70°F, 72 hours at 50°F. One mixing nozzle and one nozzle extension are provided with each cartridge.

Call for Pricing




Results 1 - 19 of 19