test

FIRE EXTINGUISHERS

The following guidelines will help you comply with safety regulations and make buying fire extinguishers easy.

OSHA Requirements for Fire Extinguishers Local or General Contractor Requirements for Fire Extinguishers
Single Story Building:
(1) 10 lb Fire Extinguisher for every 3,000 sq. ft. and within 100 ft. of any point.
Mechanized Equipment
(1) 5 lb Fire Extinguisher on each piece of mechanized equipment.
Multi-Story Building:
(1) 10 lb Fire Extinguisher per floor (every 3,000 sq. ft.)
(1) 10 lb Fire Extinguisher at each stairwell access
Vehicles:
(1) 2 1/2 lb Fire Extinguisher on each vehicle (excluding private vehicles in parking areas).
Fuel Storage Sites:
(1) 10 lb Fire Extinguisher within 50 ft. of every fuel storage site of 5 gallons or more.
Temporary Storage Sites:
(1) 5 lb Fire Extinguisher in each temporary storage site (includes tool trailers, equipment trailers, material storage).
Welders & Torches:
(1) 5 lb Fire Extinguisher within reach of every welder and torch.
Office Trailers:
(1) 5 lb Fire Extinguisher in each jobsite office trailer (3,000 sq. ft. rule applies).


P14-0116

ABC Fire Extinguishers

Effective against Class A, B, and C fires. All sizes feature a large and easy to read pressure gauge allowing instant and accurate pressure checks. Both handles and levers are made of pressed heavy gauge metal. Lever locks prevent accidental discharge. Forged, aluminum valve for maximum durability. Cylinders are made of aluminum and steel and have a chip-resistant epoxy finish. All units are rechargeable. UL® listed, DOT approved and FM listed for 5 lb. units and over. 6 year warranty.

Call for Pricing


P14-1195


P14-0985

Automatic Spot Protection - Mini-Guards

Designed for single unit installation.  Mini-Guard automatic spot protection extinguishers provide supplementary fire protection suitable for local and total flood applications.  They are designed, constructed and tested to the same engineering standards as our portable fire extinguishers.  Typical uses include dedicated protection of specialized equipment or specific fire risk areas such as flammable liquid storerooms. Not intended as a substitute for automatic sprinkler systems, fixed pre-engineered or engineered extinguishing systems. Vertical and Horizontal options.  Units can be charged with multipurpose (ABC) dry chemical and are fitted with detection sprinkler head that is rated at 165° F.

Call for Pricing


P14-1138

Centurion™ Portable Fire Extinguisher Stand

OSHA requires that fire extinguishers must be freely accessible at all times, placed in a conspicuous location, and well maintained. Our Portable Fire Extinguisher Stand not only helps with OSHA compliance, but saves time (from having to build one) and money since they are reusable and can be taken from jobsite to jobsite. Lightweight molded polyethylene with environmentally safe sand filled base (10 lb has 20 lbs of sand, 20 lb has 25 lb sand ). Plastic cabinet bodies are frame injection molded in high-impact polystyrene. Acrylic Plaskolite® panel of .080 thickness. Chromium plated brass safety lock and key with weather-proof protective lock cover,  and a polypropylene plastic hammer. Faultless casters for easy mobility. Replacement windows available.

Call for Pricing


p14-1149


P14-1137

FireMate® Extinguisher Stand

Stackable and portable fire extinguisher stand makes it easy to move from jobsite to jobsite.  Holds 5, 10 and 20 lb. extinguisher and is ideal for construction sites or wherever a fire extinguisher is required but cannot be permanently mounted.  Knockover resistant.  Made of HDPE plastic.  Color: red. Made in the USA.

Call for Pricing


P14-1216

Shutgun - Sprinkler Shutoff Tool

Shutgun shuts off activated fire sprinkler heads while keeping the system in-service. Fusible link will release if there is a fire; therefore the building is still protected.  Helps prevent excessive water damage to buildings and contents.  Offers one-handed activation means it is safe to use from a ladder.  Shutgun is a must have tool for facility owner / managers to save time and money.

Call for Pricing


P14-1439

Concealed Head Shutgun

Concealed Head Shutgun will shut off fully concealed sprinkler head models.  The longer probe of this Shutgun was specifically engineered to be able to reach the opening of the water source which is recessed inside the body of the sprinkler head.

 

Shutgun shuts off activated fire sprinkler heads while keeping the system in-service. Fusible link will release if there is a fire; therefore the building is still protected.  Helps prevent excessive water damage to buildings and contents.  Offers one-handed activation means it is safe to use from a ladder.  Shutgun is a must have tool for facility owner / managers to save time and money.

Call for Pricing




Results 1 - 8 of 8