test

ROPE GRABS



P14-0364

Cobra Rope Grab

Constructed of high impact resistant steel. Two operating modes: automatic or manual. Uses 5/8" nylon or polyester rope. Can be used on approved horizontal rope systems. Can be removed and reattached to rope at any point during transverse. Complies with OSHA 1926 and ANSI Z359 standards. Weight: 1.75 lbs. Economically priced. Manufactured by Protecta. Fits 9/16, 5/8 and 3/4 rope.

Call for Pricing


P14-0357

Guardian Rope Grab

Rope Grabs trail automatically on rope lifelines to allow users a basically 'hands-free' locking device, but locks automatically when a fall occurs. This lightweight, yet durable rope grab fits 5/8" rope diameters and is removable for use on any rope length. Meets all applicable OSHA and ANSI standards.

Call for Pricing


P14-0363

DBI/SALA Rope Grab

This rope grab automatically follows you, giving you greater freedom of movement and virtually hands-free operation. Can be installed or removed at any point on the lifeline. The rope grab utilizes a cam lever as well as a friction sensitive brake to lock the rope grab onto the lifeline in case of a fall, even if the operator holds the device open in a panic situation. Revolutionary design is less sensitive to rope variations. It works on worn rope with no annoying lock-ups. Made of corrosion resistant stainless steel and thermoplastic. Fits 5/8" diameter nylon or polyester rope. Meets or exceeds all applicable industry standards.

Call for Pricing


P14-0672

Miller Rope Grab

Designed for any vertical life-line application. Moves up and down the lifeline with the worker, while automatically locking on the lifeline in the event of a fall. Stainless steel construction. Brass roller enhances trailing rope grab movement, while reducing lifeline abrasion and wear. Accepts 5/8" rope. Comes with three foot long rope lanyard.

Call for Pricing


P14-0645

Miller Rope Grab With Manyard

Designed for any vertical life-line application. Moves up and down the lifeline with the worker, while automatically locking on the lifeline in the event of a fall. Stainless steel construction. Brass roller enhances trailing rope grab movement, while reducing lifeline abrasion and wear. Comes with a 4-foot long Manyard shock absorbing lanyard and a plated locking snap hook with a 3/4" throat opening. Accommodate 3/4" or 5/8" nylon or polyester rope.

Call for Pricing


P14-0365

DBI/SALA 3/4” Rope Grab

Mobile type rope grab designed to allow maximum freedom of movement. Hands-free operation; automatically follows the worker. Inertia/Cam Locking System utilizes a cam lever as well as a friction sensitive brake to lock the rope grab onto the lifeline during fall situations. Shock absorbing design reduces the forces generated upon a worker in the event of a fall. Can be attached or removed anywhere along the lifeline. Construction: Stainless Steel/ Aluminum. Size: 4" x 6".Weight: 1 3/4 lbs. Use with synthetic rope only. Meets applicable ANSI standards and OSHA regulations. 3' Shock absorbing lanyard sold separately (Item 14-0374)

Call for Pricing


P14-0358

DBI/Sala Wire Rope Grab

Features a patented wedging action which grips and locks onto 3/8" diameter solid core galvanized or stainless steel cable. Rope grab comes with an attachment ring to connect lanyard. Lanyard sold separately (Item 14-0374).

Call for Pricing




Results 1 - 7 of 7