test

SAW BLADES

Grind Key

ATB: (Alternate Top Bevel) - used for general purpose and cross-cutting of natural wood and veneered plywood.

TCG: (Triple Chip Grind) - used for wood-like materials including melamine, plastic laminates, laminated pressboard, acrylic and lexan. It is also used on aluminum and other non-ferrous materials.

FTG: (Flat Top Grind) - used for cutting soft and hard woods along the grain, for ripping.

NCG: (Nail Cutting Grind) - used in special rough cutting applications where nails or metal might be present.

4&1: (Four and One Grind) - used for cross cuts and ripping.



P10-1547

Construction Blades For Cordless Circular Saw

DeWalt's utra-thin kerf blade provides fast cutting. Anti-stick rim reduces friction and gum-up.

Call for Pricing


P80-0029

Panasonic 4-3/8" Metal Cutting Blade

4-3/8" x 24T Metal Cutting Blade with a 20MM arbor.

Call for Pricing


P80-0139

Saw Blade for Pressure Treated Lumber

BullFrog blade is the blade of choice when cutting pressure treated or wet lumber.This PT SERIES blade has a thin kerf designed especially for smooth cuts on miter and slide-compound. Fully hardened, tensioned tool steel bodies with tungsten carbide tips.

Call for Pricing


P80-0014

General Purpose Saw Blades

These blades have large carbide tips, are heat treated and have hand hammered bodies. They are perfect for general purpose sawing of wood, laminates and wallboard where a smooth finish is not needed. An excellent value for contractors. Available with a 5/8" bore, ATB grind.

Call for Pricing


P80-0018

General Purpose – Thin Kerf

These blades feature an ultra thin kerf requiring less horsepower, reduced stock loss and much smoother cuts. They are fully tensioned, hand hammered and heat treated with premium carbide tips than can be re-sharpened many times. Available with 5/8" bore, ATB grind.

Call for Pricing


P80-0028

Small Portable Cordless Saw Blades

Carbide tipped, all purpose saw blades perfect for use in small portable electric and battery powered cordless saws. ATB grind.

Call for Pricing


P80-0108

Nail Cutting Blades

Carbide tipped blade used for cutting lumber or flooring with hidden or embedded nails. Special FT grind, 5/8" arbor.

Call for Pricing


P80-0128

Non-Ferrous Metal Cutting Blades

Specially designed carbide and blade geometry for cutting relatively thinwalled aluminum and non-ferrous extrusions and frames. Also designed for cutting copper, brass and other non-ferrrous metals, and will work on plastics and wood if necessary. We highly recommend using a coolant or blade wax with these blades. TCG Grind Please note: NEVER attempt to cut ferrous metals (steel, iron, etc.) with these saw blades.

Call for Pricing


P80-0123

Premium Steel Cutting Blades

Steel-pro steel cutting blades are perfect for mild steel, steel pipe, channel, threaded rod, studs and steel sheet. Special tooth design with carbide tips give fast, clean cuts which reduce sparks, resists breakage, reduce burrs on edges and eliminate abrasive wheel dust. 5/8" bore w/ knockout.

Call for Pricing


P80-0064

Plywood Blade

Quality alloy steel blade, used on plywood, veneers, laminates plex-glass and other thin materials where a smooth finish is required.

Call for Pricing




Results 1 - 10 of 10