test

STEP LADDERS

Step Ladders



P14-1599

Fiberglass Step Ladder - Type 1A - 300 lb.

Type 1A, 300 lb. rated industrial step ladder, excellent for jobsite use. Inside spreader braces help protect braces from getting hooked or abused in transit. Durable molded top with slots to help keep tools close at hand. Vertically mounted U-shaped back braces are spaced at one foot intervals for maximum stiffness. Steps are double riveted with steel rivets for maximum shear strength. Slip resistant rubber feet. Meets all OSHA requirements and the ANSI A14.5 standard.

Call for Pricing


P14-0716

Fiberglass Step Ladder - Type 1AA - 375 lb. Metal Top

Features a metal tool tray top. This extra heavy duty Type 1AA (375 lbs. rated) ladder is designed to withstand daily jobsite usage. Heavy duty side locks protect against damage in transport and storage. The tool tray top is attached to the front rails with four 1/4" aluminum rivets. Each serrated 3" aluminum step is angle braced and single riveted to the front rail.

Call for Pricing


P14-1700

Fiberglass Step Ladder- Type 1AA - 375 lbs.

Meets ANSI Type IAA 375 lb. standard. Strong molded boot helps to protect the fiberglass rail and the thick rubber tread provides a secure, slip resistant footing. Inside spreader braces help keep braces from getting hooked or abused during transit. Each step features heavy duty gussets secured with large steel rivets. The bottom step has two pairs of steel gussets for even more strength. Wide back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Rugged, non-conductive structural molded top. Shox step supports offer enhanced impact absorption and better protection against damage.

Call for Pricing


P14-1620

Twin Front Fiberglass Step Ladder Type 1A (300 lb)

“Twin-Front” design allows entry to ladder from either side allowing the ladder to be used simultaneously by one person per side. (Total combined weight on ladder must not exceed 600 pounds; 300 lbs. per side.) Features inside spreader braces which help protect braces from damage in transit. Heavy gauge steel hinge design at top of ladder. Slip resistant rubber feet. SHOX step supports offer enhanced impact absorption and better protection against damage.Meets all OSHA requirements and the ANSI A14.5 standard. Type 1A.

* Type 1AA rated (375 lbs)

Call for Pricing


P14-1619

Fiberglass Platform Ladder (300 lb.)

The Fiberglass Platform Ladder has a 300 lb working load. Large fully serrated platform is slip resistant and makes it possible to get closer to the work area than on standard stepladders. Polypropylene copolymer upper boot provides strength, durability, and fiberglass rail surface protection. Thick non-marring thermoplastic elastomer tread is bonded and mechanically fastened to the upper boot and provides slip resistant footing. Aluminum cross brace serves as a railing for working on the platform. SHOX step supports offer enhanced impact absorption and better protection against damage. 300 lbs. capacity (includes the weight of user and tools). The ladder meets or exceeds the safety standard set by ANSI and OSHA.

Call for Pricing


P14-1638

Fiberglass Pro Platform Ladder

An 8 foot non-conductive fiberglass platform ladder capable of holding a load capacity of 300lbs. Featuring an extended handrail, ProTop with tool slots and magnet and a larger platform. Also equipped with SHOX impact system and Da Boot.

Call for Pricing


P14-1632

Fiberglass Tripod Ladder (300 lb)

Tripod fiberglass ladder offers more stability than a four-legged ladder and has the ability to get into tighter spaces. This ladder features a full metal boot-aluminum angle feet with thick slip resistant rubber tread. It has a center-pull spreader brace and outrigger rail brackets. Steps are constructed with double rivets and heavy double gusset bracing. 300 lb. load capacity (includes user and tools). This ladder meets or exceeds standards set by ANSI and OSHA.

Call for Pricing


P14-1705

Fiberglass Trestle Ladder (300 lb.)

The trestle ladder allows the user to get closer to work areas in ceiling where obstructions are in the way. Perfect for Sprinkler, HVAC, and Electrical contractors who need to work inside or above drop ceilings. Fly section can be raised or lowered in 12" increments without closing the trestle. Slip resistant rubber feet provide sure footing. 300 lb. load capacity (includes user and tools). This ladder meets or exceeds the safety standards set by ANSI and OSHA.

Call for Pricing


P14-0712

Fiberglass Step Ladder - Type 1 (250 lb.)

Heavy duty, Type 1, 250 lb. rated step ladder ideal for in-house maintenance use. Durable molded top with slots to help keep tools close at hand. Heavy duty plated steel spreader braces with double rivet hinge protects user from pinched fingers. Double riveted steps for maximum shear strength. Slip resistant rubber feet. Meets all OSHA requirements and the ANSI A14.5 standard.

Call for Pricing


P14-2023

Cross Step Ladder

Cross Step Ladder is a 2-in-1 ladder that converts from a Step Ladder into a Shelf Ladder for a 2 in 1 combination. V-Shape ProTop allows the ladder to lean against walls, buildings and poles. ProTop with magnet and multiple tool slots. Innovative Lock Latch to secure rear section. Raptor boot protects fiberglass and has non-marring heavy duty bonded tread.  Shox – superior impact absorption, protects fiberglass and step. Double rivet and flared construction for rigidity and stability. Type 1A; 300 lb load capacity

Call for Pricing


P14-1502

Type 1 Wood Step Ladder (250 lb.)

Industrial pine wood stepladders designed for rugged jobsite use.  Heavy duty pinch resistant spreader braces are inside 3' through 6' and outside an 8' and larger.  Wrap around top irons protect the top from damage.  Steps are braced with heavy duty angles with extra bracing 6' and up.  Meets all OSHA requirements and ANSI standards.

Call for Pricing




Results 1 - 11 of 11