DROP-INS

Base Material:
Solid Concrete, Solid Block, Hard Stone
Size Range:
1/4" to 3/4" Standard Thread, 1/2" & 3/4" in Coil Thread
Anchor Material:
Carbon Steel and Type 304 or 316 Stainless Steel
The Steel Drop-in is an all-steel, machine bolt anchor available in carbon steel and two types of stainless steel. It can be used in solid concrete, hard stone, and solid block. A coil-thread version for forming applications is also available.



P95-6304

Smart DI+™ Drop-In Anchor

Base Material: Solid Concrete, Hard Stone, and Solid Block Base Material

Size Range: 1/4" to 3/4" Standard Thread

Anchor Material: Carbon Steel

 

The Smart DI+ is an all-steel, machine bolt anchor available in carbon steel.  It can be used in solid concrete, hard stone, and solid block base materials.  The Smart DI+ is specifically designed to be easier to fully set during installation reducing the amount of hammer blows when setting by approximately 25% compared to competitive brands.

 

 

Call for Pricing


P95-0391


P95-0425


P99-6304


P99-6324


P99-6204


P99-6224


P99-6330

Carbon Steel Coil Thread Drop-in

Use Setting Tool item 99-6309 for 1/2" size,
item 99-6313 for 3/4" size.

Call for Pricing


P99-6305


P99-0393

SDS Plus Stop Bits

Stop bits ensure proper drilling depth for drop-in anchors. This is especially important when drilling into post tension slabs. The 1.25" shoulder keeps user from over drilling. Available in the most common drop-in anchor sizes with labels that clearly call out which size bit to use with which size drop-in anchor. Fits all SDS+ Hammers.

Call for Pricing


P99-6325

Mini Drop-ins

Base Material:

Precast Hollow Core Plank, Concrete

Size Range:

1/4" to 1/2" standard thread"

Anchor Material:

Carbon Steel

The Mini Drop-in is a carbon steel, machine bolt anchor for use in shallow embedment applications. Besides solid concrete and hollow core concrete plank, it can be used in hard stone and solid block. It may also be used in overhead applications.

 

Call for Pricing


P99-6336


P99-2195

Mini-Undercut+™

The Mini-Undercut+™ anchor is an internally threaded, self-undercutting anchor designed for performance in cracked and un-cracked concrete.  Suitable base materials include post-tension concrete (PT slabs), hallow-core precast concrete, normal-weight concrete, sand-light concrete and concrete over steel deck.  The Mini-Undercut+ anchor is installed into a pre-drilled hole with a power tool and a setting tool.  The result is an anchor which can provide consistent behavior at shallow embedments as low as ¾ of an inch.  After installation, a steel element is threaded into the anchor body.

Call for Pricing


P99-6400

Snake+™ Self-Tapping Anchor

The Snakeanchor is an all steel, self tapping, machine bolt anchor designed for use in concrete and is suitable for overhead applications. Installed with a power tool and mechanically interlocks with the base material.

Each box of Snake Anchors comes with a setting tool.

 

 

Call for Pricing


P99-6402


P92-8503

Set it Fast Setting Tool

A unique and revolutionary patented system for installing drop-in anchors. SDS shank fits all brands of rotary hammers. Safe and efficient method for installing anchors overhead, in walls, and in floors.

Call for Pricing




Results 1 - 16 of 16