test

3M FIRESTOP



P12-1502

3M CP25WB+ Caulk

An endothermic, intumescent latex / water based sealant. Provides up to a 4-hour fire rating. More versatile than Firedam 150 product (can be used with more UL classifications). Water based product makes clean up easy.

Call for Pricing


P26-0285

3M™ Fire Barrier Sealant IC 15WB+

Economical, general-purpose latex-based intumescent firestop sealant. Provides up to a 3-hour fire rating. Water based product makes clean up easy.

Call for Pricing


P12-1483

3M™Fire Barrier Sealant FD 150+

Economical firestop sealant for through-penetration and joint applications.  Up to 4-hour fire ratings for joint systems per ASTM E 1966 (UL 2079).  Up to 3-hour fire ratings for through penetrations per ASTM E 814 (UL 1479).  Elastomeric — forms a flexible seal with compression/extension of up to ±19% of nominal joint width.  Easy installation, cleanup and disposal.  Formulated without halogens.  Sag-resistant.  Check UL directory. Not approved for use with CPVC pipes made using Noveon® resin.

Call for Pricing


P26-0213

3M™ Fire Barrier Cast-In Devices for Plastic Pipes

Intumescent device that firestops 2-inch non-metallic penetrations through fire-rated concrete floor assemblies. The device is installed by attaching directly to the form before a concrete slab is poured. Creates an opening through which mechanical, electrical or plumbing penetrants can be routed after the slab is cured and forms are removed. Provides up to 3-hour fire protection. Easily adjusted height accommodates concrete thickness from 2-1/2" up to 8".  Rugged one-piece design to withstand every-day bumps, kicks and hard knocks of the construction process. Red color easily identifiable as fire-rated device.

Call for Pricing


P26-0228

3M™ Fire Barrier Cast-In Tub Box Assemblies

Our 3M™ Fire Barrier Cast-In Tub Box Assemblies create a void on the top surface of a concrete slab to allow for plumbing. Simply remove the foam insert after the slab is cured to access the void. This provides a secure and permanent firestop solution.  Firestop tested for up to 3 hours, when used in conjunction with a 2-inch 3M™ Fire Barrier Cast-In Device for metallic and non-metallic penetrations, in accordance with ASTM E 814 (UL 1479).  Easily adjusted height accommodates concrete thickness from 4-1/2 inches to 8 inches.  Eliminates time and expense of core drilling holes in concrete.

Call for Pricing


P12-1514

3M Plastic Pipe Device

Easy to install devices achieve a 2-hour fire rating for PVC and ABS pipe. Unique anchor straps replace the need for power tools, mounting screws, washers and other fasteners - all you need is pliers. One piece metal collar - just lock the latch and bend the tap to secure. Intumescent and endothermic. Can also be conventionally anchored.

Call for Pricing


P12-1508

3M Fire Barrier Moldable Putty

An intumescent and endothermic hand moldable putty product. Adheres to all common building surfaces including cement, gypsum, wood, plastic and metal. As a moldable product, openings can be sealed and reentered with ease. Can be used to seal construction gaps, cable, insulated pipe, electrical conduit, electrical boxes and metal pipe.

Call for Pricing


P12-1484

3M™ Fire Barrier Pillows

Call for Pricing


P12-1482

3M™ Fire Barrier Duct Wrap 615+

Flexible solutions for the protection of grease ducts, ventilation air ducts, return air plenums, emergency circuits, structural steel and more. These flexible wrap products make installation easy, even around corners. Ideal for use in a wide variety of commercial and industrial applications. Certified for grease ducts to ASTM E 2336 (including ASTM E 119 engulfment) in 2-layer systems. Certified for ventilation ducts to ISO 6944 in 1-layer systems and for other key life-safety duct applications. Heat-resistant (up to 2,192°F).  Flexible for wrapping around corners and obstacles.

Call for Pricing


P12-1506

3M Fire Block Foam

Fire Block Foam is a ready-to-use foam fireblock designed to help prevent the spread of flames and smoke in residential Type V and non-commercial rated construction*.  Quickly seals openings, expanding up to 200% in volume. Heat resistant up to 240° F.  Bonds to most building materials,  excellent as a draftstop and a thermal insulator.  Tack-free in approximately 5 minutes. Tested to ATM E 184 (modified) as a Type V residential fireblock.

Call for Pricing


P12-1479

3M™ Smoke and Sound Tape

3M™ Smoke and Sound Tape provides a smoke and sound barrier by minimizing smoke and sound transfer between rooms and floors when installed in a variety of construction joints and through penetrations. Smoke and Sound Tape carries an “L” rating and has been tested to ASTM E 90 and ASTM E 413 – achieving an STC-Rating of 54 when tested in an STC 54-rated wall assembly.  High tack adhesive bonds to most common building materials and adheres to damp surfaces.  Can be installed in a broad range of temperatures.

Call for Pricing


P12-1475

3M™ Fire and Water Barrier Tape

3M™ Fire and Water Barrier Tape is an elastomeric fire, water, smoke and sound tape. When installed properly it can act as a barrier to water leakage and airborne sound transmission, while helping to control the transmission of fire, heat and smoke.  3M™ Fire and Water Barrier Tape can provide up to 4-hours of fire protection in construction joints per ASTM E 1966 (UL 2079), 3-hour fire protection in perimeter joints per ASTM E 2307 and 2-hour fire protection in through-penetration applications per ASTM E 814 (UL 1479). Offers broad temperature range when applying with a high tack adhesive sticks to many common building materials.

Call for Pricing




Results 1 - 12 of 12