test

ACCESS DOORS



P20-0570

Plastic Access Doors

Designed to provide easy access to walls and ceilings. The 1/8” high impact styrene plastic with U.V. stabilizers will not fade or corrode. The door is completely removable from the frame and fits tightly with snap latches. The white finish, with textured exposed surfaces, can be left as is or painted to match the surrounding areas. Flush to frame with rounded safety corners and one piece outside flange with 3/4" deep mounting frame. Snap latches allow door to fit tightly within frame.

Call for Pricing


P20-0241

Cylinder Lock for Access Doors

Elmdor Cylinder Lock for Access Doors. Can be installed by the end user.

Call for Pricing


P20-0243

Fire Rated Access Doors - For Walls

Fire rated access door for wall installation only. Underwriters Laboratories rated for 1.5 hours, "B" label, and meets ANSI-UL 10B standard. Heavy duty spring closer assures positive latching when door closes. Concealed hinge, only door and frame is visible. Recessed exterior latch with ring operation. Interior latch release allows for door to be opened from the inside. Prime coated suitable for painting. Optional cylinder lock. Other sizes and styles available, including stainless steel. Call for a complete listing. Manufactured by Elmdor.

Call for Pricing


P20-0010

Drywall Access Doors

Designed for flush installation in drywall ceilings and walls. The flange of the door is textured and includes a bead so drywall joint compound can be applied in sufficient thickness to conceal flange. Prepunched holes in the flange provide additional “tooth” for the joint compound and facilitate fastening the flange to framing members with drywall screws. Joint compound is applied at the same time drywall joints are finished. The door is held in place by a continuous concealed piano hinge and stainless steel cam-and-stud type catches. Prime coated steel finish. Manufactured by Elmdor.

 

Call for Pricing


P20-0019

Fire Rated Access Doors For Walls & Ceilings

Insulated fire rated door for drywall, masonry or plaster. Rated by Underwriters Laboratories for a 1.5 hour “B” label fire rating in walls and by Warnock Hersey for 3 hours in ceilings and 2 hours in walls. Door panel contains two inches of insulation in sandwich type construction and swings easily to 175º on a continuous hinge. Doors are furnished with automatic closers and are self-latching. Interior latch release allows the door to be opened from the inside. Frame is fabricated for 16 gauge, galvanized steel with prime coate finish and provided with masonry anchors and bolt holes. Prime coated steel finish. More sizes and styles available, including stainless steel. Call for a complete listing. Manufactured by Elmdor.

 

Call for Pricing


P20-0007

Duct Access Doors

Designed to provide access to equipment stored within ducts. The door panels are insulated, and the gaskets between the panel and frame will ensure tight seals without obstruction in the air system. The door and frame are fabricated from 24 gauge, galvanized steel. The door is 1" thick, double wall constructed and insulated. Frame is provided with knock-over tabs, which easily attach to the duct. Manufactured by Elmdor.

 

Call for Pricing


P20-0001

Access Doors

For new installations or remodeling in all types of walls and ceilings including drywall and masonry. Perfect concealment of rough wall opening is achieved by the exposed frame flange, which also adds rigidity to the unit. Flexible anchor straps are utilized for installation within masonry openings and the frame is provided with holes for fastening within furred spaces. Door assembly consists of a stainless steel cam-and-stud type catch operated by a screwdriver. Prime coated steel finish. More sizes and styles available, including stainless steel. Access doors also available with cylinder locks. Call your Colony sales representative for a complete listing.  Manufactured by Elmdor.

Call for Pricing


P20-0250

Adjustable Access Doors

Adjustable to the size of the opening; offering a flush-mounted, metal panel that is durable and versatile.  Adjusts up to 1.5” in width and height to fit various opening sizes.  Aesthetic with magnetic latch and hidden flange for a concealed appearance.  Install is quick and easy; requires minimal tools.  Door panel: 20 gauge cold rolled steel, frame: 24 gauge galvanized steel frame with notched knock-over tabs.  Screwdriver operated cam lock. Manufactured by Cendrex.

Call for Pricing


P20-0255

Fire Rated Uninsulated Access Door with Drywall Flange for Walls Only

Not insulated and can only be used on fire rated walls, specifically those made of drywall. 16 gauge cold rolled steel.  Not suitable where protection against temperature elevation is required.  Self-latching tool-key operated latch and / or ring operated latch (both included).  High quality with powder coated primer. Manufactured by Cendrex.

Call for Pricing




Results 1 - 9 of 9