CONCRETE REPAIR & ANCHORING PRODUCTS



P26-0490

Sika® Level-02 EZ Primer

Special acrylic primer for use on sound, smooth and non-porous substrates in interior areas. Applied prior to the use of Sika® Level products on epoxy, ceramic tiles, old vinyl, linoleum and rubber coverings. Provides optimum adhesion. Ready-to-use, no dilution required and quick dry time. One gallon pail.

Call for Pricing


P26-0161

Sakrete 5000 Concrete Mix

A professional grade blend of portland cement, sand and gravel that is formulated to reach strength quicker and for superior durability. For repair and building jobs where concrete thickness exceeds 2”. High early strength 5000 psi concrete for commercial structural applications and superior durability. Use for driveways, slabs, walkways, curbs, stairs, ramps, and countertops. Rapid setting ready for foot traffic in 12 hours. Faster strength gain than normal concrete in cold weather. Yield: 0.45 ft.

Call for Pricing


P26-0162

Sakrete® Sand Mix

Sakrete® Sand Mix/Topping & Bedding Mix is a preblended mixture of sand and cementitious materials. A multipurpose product designed for a variety of projects. High Strength 5,000 psi. Applications 1/2” to 2”. Use for repairing wide cracks in concrete and masonry, driveways, slabs, patios, walkways, concrete overlays and filling masonry block cores. Yield: .045 ft

Call for Pricing


P26-0171

Portland Cement, Lime & Sand Mortars - AMX 400 Series

The AMX 400 Series is a factory blend of Portland cement, hydrated lime and dried sand. The AMX 400 Series is specially formulated to provide high water retention, exceptional workability and superior bond strength. Available in types N, S and M.  Uses includes: Interior or exterior applications, above or below grade, (Type N - Above grade only), Laying or resetting brick, block and stone, and for load and non-load bearing construction.

Call for Pricing


P26-0160

Sakrete Concrete Mix

High strength concrete mix for anchoring posts and poles, and pouring footings and slabs. Premium quality for consistent strength and durability. Just add water.

Call for Pricing


P26-0167

Quikrete Mortar Mix Type N

Quikrete 60 lb mortar mix is a blend of masonry cement and graded sands. Used to join block, brick and stone in above grade nonstructural construction and repairs. Meets property requirements of ASTM C270 and C1714.

 

Call for Pricing


P26-0194

US Cold Patch

A ready to use recycled asphalt product for permanent patching of potholes, cracks and other defections in blacktop and concrete.  It is odorless and eliminates most of the VOC vapors found in other patch material.  Stronger and easier to use than other pothole repair products.  Drive on immediately after use.

Call for Pricing


P26-0196

CMP AS-100

AS-100 is a premium interior / exterior acrylic primer designed for use with CMP’s line of underlayment’s and toppings. AS-100 can be used on a wide variety of substrates including concrete, wood, well bonded VCT, Epoxy, Gypsum underlayment, cutback and other adhesive residues not affected by water. AS-100 is quick drying and with a unique ability to bond to both porous and non-porous substrates.  Can be rolled, broomed or spray applied depending on application.   Water based and VOC compliant and can be applied to Green concrete a minimum of 5 days old.  Contributes points to LEED Certified Projects.

Call for Pricing


P25-0625

Sakrete Concrete Mortar Dissolver

Sakrete Concrete Mortar Dissolver is a safe, environmentally friendly liquid alternative to aggressive acid concrete removers. Concrete Mortar Dissolver can be used to remove dried on cement, concrete, mortar, or stucco from most surfaces. Multiple applications used in conjunction with mechanical means may be necessary for removing stubborn or thick built up areas.

Call for Pricing


P26-0195

CMP Level-1

Level-1 is a cement based, interior, self leveling underlayment that can be used to create a smooth, flat or level surface prior to the installation of floor coverings. Its extended working time, low shrinkage and superior leveling properties make it the ideal product for renovation and new construction projects where next day flooring installations are not critical.  Level-1 produces a hard durable surface that can be left open to normal construction traffic for up to one year before the installation of finished flooring and it can be feather-edged to meet existing transitions. Contributes points to LEED® Certified Projects. Can be installed over “Green Concrete”.

Call for Pricing


« Start « Prev 1 2 Next » End »»

Display Results per Page

Results 21 - 30 of 30