HOLE SAWS



P29-1074

Milwaukee Plumbers’ Bit Kit

Complete assortment of the most commonly used Milwaukee bit for large hole drilling. Sizes include 7/8", 1 1/8", 1 1/4", and 1 1/2" Auger Bits and 1 3/4", 2 1/8", and 2 9/16" Self-feed Bits. Also 5 1/2" one piece shank and coupling extension, one coarse and one regular feed screw pilot, socket wrench, and hi-impact polyethylene carrying case.

Call for Pricing


P28-0445

Milwaukee Electrician's Carbide Cutter Kit (7 Pieces)

Kit includes: 7/8" Carbide Cutter, 1-1/8" Carbide Cutter, 1-3/8" Carbide Cutter, 1-3/4" Carbide Cutter, 2" Carbide Cutter, Pilot Bit, and Quick Change Arbor with Pilot Bit.

Call for Pricing


P11-8991

DeWalt Flexvolt 7 pc Carbide Wood Drilling Hole Saw Kit

Engineered to Maximize Runtime.  Carbide Teeth for long life with thin Kerf Design for high efficiency.  Self-Feed Pilot Bit for fast, efficient cutting and spring-loaded collar that automatically engages drive pins to prevent hole saws from locking to the mandrel. Includes: Hole saws: 2-1/8", 2-9/16", 3-5/8", Quick Change Mandrel, and Self-Feed Pilot Bit (3).

Call for Pricing


P11-8992

DeWalt Flexvolt Self-Feed Pilot Bit

Self-Feed Pilot Bit for fast, efficient cutting. Engineered to Maximize Runtime.

Call for Pricing


P11-8993

DeWalt Flexvolt Self-Feed Pilot Bit with Quick Change Mandrel

Engineered to Maximize Runtime.  Self-Feed Pilot Bit for fast, efficient cutting. Spring-loaded collar that automatically engages drive pins to prevent hole saws from locking to the mandrel.

Call for Pricing


P12-1665

Diamond Hole Saws

Lenox diamond hole saws feature a brazed diamond edge for more holes in tile and stone. Cuts holes faster than carbide grit or carbide tipped hole saws. Round holes make removing plugs faster and easier. Use for cutting cast iron, cement board, marble, granite, and other abrasive materials. Uses a standard or snap-back arbor.

Call for Pricing


P12-1647

One Piece Diamond Hole Saws

Lenox's one piece diamond hole saw features a continuous, brazed edge which lasts longer in tile and stone drilling applications. Low torque design requires less torque. Over sized slot for easy slug removal. No arbor required.

Call for Pricing


P29-1368

Carbide Tipped Pilot Drill

Designed for use with the Lenox or any brand of carbide or carbide grit hole saw. Fits Lenox 1L and 2L arbors, and Milwaukee 49-56-7000 and 49-56-7055 hole saw arbors.

Call for Pricing


P12-1901

Lenox Carbide Hole Cutters

Designed specifically for sheet metal hole cutting. Precision ground carbide teeth for fast cutting of clean, burr-free, accurate holes. Over-drill stopper prevents the tool from penetrating beyond the hole. A split point pilot bit reduces the potential for the bit to “walk”. Heat resistant carbide teeth will yield long life in both sheet metal and stainless steel. Uses standard hole saw arbors.

Call for Pricing


P12-1921


P12-1924

Lenox Electrician’s 12-Piece Carbide Hole Cutter Kits

Includes the following Carbide Hole Cutters: 7/8”, 1 1/2", and 1 3/8”. Arbors included: 3L (Item 12-1923) and 5L (Item 12-1656). Also a split point pilot bit, plug ejection springs and 1/8” hex wrench. Durable plastic case.

Call for Pricing


P12-1925

Lenox Electrician’s 15-Piece Carbide Hole Cutter Kits

Includes the following Carbide Hole Cutters: 7/8”, 1 1/8", 1 3/8”, 1 3/4", 2” and 2-1/2". Arbors included: 3L (Item 12-1923) and 5L (Item 12-1656). Also a split point pilot bit, plug ejection springs and 1/8” hex wrench. Durable plastic case.

Call for Pricing


P10-0411

M.K. Morse Bi-Metal Hole Saw

More teeth, deeper gullet in the cutting action increases material removal.  New tooth form maximizes penetration with a positive rake face.  Engineered with the strongest tooth profile.  Applications:  steel plate, pipe, angle iron, wood, composite material, plastic, sprinkler pipe and electrical box.

Call for Pricing


P10-0523

M.K. Morse Bi-Metal Hole Saw with Built-in Arbor

Optimized to remove material faster. New cap reduces runout and vibration. Premium M42 high speed steel. 1 15/16" cutting depth. New side slot for increased leverage for faster, `easier slug removal. Applications: Wood, plastic, machinable metals, stainless steel alloys, and nail-embedded wood.

Call for Pricing


P12-1977

M.K. Morse Carbide Tipped Hole Saws

Special tooth design for very fast hole saw cutting.  Ground and set teeth help to cut materials that bi-metal saws will not cut.  3 teeth per inch creates a wider gullet for better chip clearance and faster cutting.

Call for Pricing


P12-1852

M.K. Morse 8 pc Plumber's Hole Saw Kit

Pipe tap sizes for pipes up through 2".  3/4", 7/8", 1-1/8", 1-1/2", 1-3/4" and 2-1/4".  Arbors included:  MA34 and MA45PS.

 

Call for Pricing


P12-1972

MK Morse 8-Piece Bi-Metal Hole Saw Locksmith Kit

Kit includes: Saws (1 each): 7/8˝, 1˝, 1-1/4˝, 1-1/2˝, 1-3/4˝, 2-1/8˝Arbors (1 each): MA24, MA45PS

Call for Pricing


P12-1974

MK Morse 13-Piece Bi-Metal Electricians Kit

(MHS08E) Entrance sizes to 4˝. Kit includes: Saws (1 each): 7/8˝, 1-1/8˝, 1-3/8˝, 1-3/4˝, 2˝, 2-1/2˝, 3˝, 3-5/8˝, 4-1/8˝, 4-1/2˝.  Arbors (1 each): MA24, MA34, MA45PS

Call for Pricing


P12-1990

MK Morse 16-Piece Bi-Metal Plumbers Kit

(MHS16P) Entrance sizes to 4˝. Kit includes: Saws (1 each): 3/4˝, 7/8˝, 1-1/8˝, 1-1/2˝, 1-3/4˝, 2-1/4˝,  2-9/16˝, 3˝, 3-1/2˝, 4˝, 4-1/4˝, 4-1/2˝. Arbors (1 each): MA34, MA45PS. Pilot Drills (2 each): MAPD301

Call for Pricing


P12-1973

MK Morse 19-Piece Bi-Metal Industrial Kit

(MHS06I)  Kit includes:  Saws (1 each):  ¾”, 7/8”, 1-1/8”, 1-3/8”, 1-1/2”, 1-3/4”, 2”, 2-1/4”, 2-1/2”, 3”, 3-1/4”, 3-5/8”, 3-3/4”, 4-1/4”, 4-1/2”. Arbors (1 each): MA24, MA34, MA45PS. Extension 12”

Call for Pricing


« Start « Prev 1 2 3 Next » End »»

Display Results per Page

Results 21 - 40 of 49