test

CONCRETE GRINDERS AND SCARIFIERS

Changeable Heads For Floor Surfacer Edco Scarifier Accessories


P10-9895

Edco Tileshark Floor Stripper

Edco's TileShark™ Floor stripper has an oscillating blade drive system that allows it to slice under the material making the removal easier and quicker.  Designed to removed glued down, soft-good type tiles from a floor's surface.  7-guage steel welded construction and multiple position handle assembly.  Ideal for removing vinyl tile, linoleum tile, VCT and carpeting.  Folding handle design in the easy transport / storage mode folds down to 20" to easilty into a car trunk.

Call for Pricing


P10-9918

Edco Single Disc Electric Grinder

Grinds concrete slabs, terrazzo, wood block floors, brick or stone. 11'' working width. Grinds approximately 200-250 sq. ft./hr. at 1/32'' with Edco Dyma-Serts™. 1.5 HP, 115 volt electric motor. Includes 1 multi-accessory disc, which accepts Dyma-Serts, Strip-Serts, and other grinder accessories. Ideal for areas less than 1,500 square feet. Please note that this machine requires 3 grinding accessories which must be purchased or rented separately. Weight: 160 lbs.

Call for Pricing


P10-9940

Dyma-Serts™

Dyma-Serts are diamond segments welded to a backing plate to improve grinding speed and remove tough coatings. One set of Dyma-Serts will grind up to 30,000 square feet. Kit includes 6 General Purpose Concrete Dyma-Serts including holding cases and wedges. Many other grits available for most any application. Call for more information.

Call for Pricing


P10-9942

Strip-Serts™

Strip-Serts are carbide tipped blocks designed to clean floors without grinding into the concrete. Replaceable, multisided tungsten carbide edge can be rotated for maximum use. Cleans the surface without damage. Removes rubber, ice, fiberglass, resins, tar or paint from concrete surfaces without grinding into the concrete. Kit includes 6 Strip-Serts™ plus 6 extra Pro Tungserts and wedges.

Call for Pricing


P10-9913

Grinding Stones

Various grits available for coarse or fine polishing. Ideal for smoothing trowel marks, removing rain spots, leveling high spots less than 1/16", removing excess concrete, smoothing rough finishes, grinding or polishing marble or terrazzo.

Call for Pricing


P10-9925

Chisel Scalers

Air-powered hand tools that produce a rapid, hammering action to increase production on jobs that would require manual scraping. Made of heavy duty steel. These scalers require only 6-8 cfm @ 80-90 psi. Applications include carpet and floor tile removal, mastic removal and concrete chipping. Each tool includes (1) 4" forged steel chisel.

Call for Pricing


P10-9935

Scaler Accessories

Call for Pricing




Results 1 - 7 of 7