test

FESTOOL DRILLS / DRIVERS

Festool's drill look differnent, because they are different.  Crafted to the highest level of German Engineering, Festool drills offer a level of quality not found in other drills.  From the highly efficient motors, advanced ergonomics and interchaneable Centrotec® and FastFix® chucks, these drills were designed to work the way people work.



P13-1639

Festool T Series Lithium Ion Cordless Drill Set

From the EC-TEC brushless motors, to the interchangable Centrotec and FastFix chucks, this cordless drill was designed to work the way you work.  Five Drills in One.  Thanks to Festool's innovative FastFix chuck system, the T-Series cordless drill is incredibly versatile and does the work of five drills in one.  The eccentric chuck is perfect for corners and against adjoining edges.  Brushless motor deliver longer run times, more screws per charge and a significantly longer service life.   Also equipped with thermal protection and low battery indicator. Kit includes:  2x battery pack BP-XS, charger MXC, CENTROTEC Chuck, CENTROTEC bit holder, FastFix keyless chuck 3/8", right angle chuck, PH 2 bit, belt clip, and in SYSTAINER SYS 1 T-LOC.

Call for Pricing


P13-1485

Festool C Series Lithium Ion Cordless Drill Set

From the EC-TEC brushless motors, to the interchangable Centrotec and FastFix chucks, these cordless drills were designed to work the way you work.  Five Drills in One.  Thanks to Festool's innovative FastFix chuck system, the C-Series cordless drill is incredibly versatile and does the work of five drills in one. The eccentric chuck is perfect for corners and against adjoining edges. The keyless drill chuck can be used with drill and driver bits up to 1/2" in diameter. For lighter weight and a more compact footprint, use the smaller, lighter Centrotec chuck with its full array of interchangable drill and driver bits. The most unique is the right-angle chuck which provides a 90° angle to the drive motor for tight spaces. The eccentric and right-angle chucks can both swivel a full 360 degrees with 16 locking positions. Includes:  Charger, (2) batteries, FastFix Keyless Chuck, Centrotec Starter Set, Centrotec Chuck, and Systainer.


Call for Pricing


P13-1483

Festool Cordless Hammer Drill Li 5,2 Set

With the PDC 18, Festool set out to create the ultimate drilling machine. A four-speed gearbox provides loads of torque for hogging out material with large diameter drill bits, then quickly switches over to deliver 3,800 RPMs to blast through concrete with its hammer drill functionality

Call for Pricing


P13-1653

Festool Cordless Drywall Screwgun

Introducing the most refined and capable drywall gun yet – the DWC 18. Equipped with magazine attachment for using commonly available collated screws, on-demand push and drive system (no need to hold the trigger), electronic cut-off, precision depth control, user-serviceable magazine, and EC TEC brushless motor. Quiet, efficient, and accurate, for faster installs with less fatigue. Includes: charger, magazine attachment, depth stop, belt clip, scaffolding holder, magnetic bit holder, PH 2 bit, bit PH2, long, spare battery pack lithium-ion 5.2 Ah included in a rubberized frame, and aSYSTAINER SYS 2 T-LOC.

Call for Pricing


P13-1482

Festool Rotary Hammer BHC 18 Li 5,2-Set

The new BHC 18 Rotary Hammer has the best power-to-weight ratio in its class. Combined with a compact and ergonomic C-handle design, the BHC’s light weight and low vibration makes for efficient and comfortable one-handed use, whether for extended periods or even overhead applications. And since a tool like this is going to be pushed to its limits day after day, we’re backing it up with Festool’s exclusive Service All-Inclusive

Call for Pricing


P13-3322

Festool FastFix Depth Stop Chuck

Depth stop for consistent, precise depth setting regardless of material.  Integral cluth maintains depth independent of torque setting.  Quickout ring backs out screws without affecting depth setting. For all Festool C and T cordless drills with FastFix interfaces, except CXS and TXS.

Call for Pricing


P13-1255

Festool CE Countersink Drive Bit 3.5mm

3.5mm Adustable countersink drill bit with a free spinning depth stop for use with the Centrotec system.  The Centrotec shank is designed for use with the Festool Centrotec System, as well as with all standard or keyless chucks for no-slip performance.  The Centrotec System was designed to provide a seamless transfer of force, eliminating bit slippage or marring of the drill bit.  The weight of the drill is reduced by nearly ½ pound, and the length is reduced by nearly 1-1/2” with the Centrotec System. Most importantly, the Centrotec system offers a quicker and more secure means of bit change than any other quick-change chuck system.  3.5mm fully adjustable countersink drill bit with depth stop.  Depth stop rotates freely, eliminating burning or marring of your finished surface.  Save money by only having to replace the bit and not the entire assembly.  Long, precision milled hex shank eliminates wobble, or run out during use

Call for Pricing


P13-1258

Festool Centrotec Torx Bit

Long shaft Centrotec Torx bits with precision milled shaft and durable Zirconium Nitride (ZrN) coating. Also compatible with standard or keyless chucks.  Includes 2 bits.  Reduce fatigue with the lightweight Centrotec chuck and decrease drilling/driving clearance.  Zirconium Nitride (ZrN) coating provides excellent erosion resistance.  Centrotec bits extend directly into the drill spindle so they serve as an extension of the motor, significantly improving controllability and torque.

Call for Pricing


P13-1261

Festool Twist Drill Set

The Spiral Drill Bit Set with Reusable Centrotec Shank provides a precise, compact, and durable solution for drilling wood, metal, and plastic. Precision-ground HSS steel stays sharp longer for precise hole drilling and a long service life.  This set is based on a replaceable drill bit that fits securely into a reusable Centrotec shank for quick and efficient use with the Festool Centrotec Chuck System.  The reusable Centrotec shank can also be used with all three-jaw chucks for no-slip performance. Set includes 3 bits, reusable Centrotec shank, set screw and allen wrench. The Festool Centrotec System is designed to deliver a better transfer of force between the drill and the bit, with no chance for bit slippage or marring of the drill bit.  The Centrotec Chuck design enables a full 1/2 pound reduction in weight, and reduces the overall length, or clearance, by nearly 1-1/2 inches.  The quick-change Centrotec system delivers a faster, more efficient means of changing bits and driver tips than any keyless chuck system, and virtually eliminates run out.  Centrotec design can be used with Centrotec Chuck System, or with any three-jaw keyless chuck system

Call for Pricing




Results 1 - 9 of 9