test

FESTOOL GUIDE RAILS

P13-1210

Festool Guide Rail

Festool FS Guide rails are available in eight different lengths from 32 inches to 197 inches (800 - 5000 mm), providing the right rail for every application.  The integrated splinterguard aligns perfectly to your cut line, saving set up time and serving as protection against tear out, on cuts both with the grain and across.  Guide rails can be easily connected using the accessory guide rail connectors for a rigid, secure and continuous connection.  Guide rails make work easier by taking the tool to the work, and save time and money by eliminating laborious measurements, rework and wasted material.  Use the 13-1210 Guide Rail (55 inches) with the Festool TS Plunge cut saw to make precision cuts up to 49 inches long.  Use the 13-1211 Guide Rail (75 inches) with the Festool TS Plunge cut saw to make precision cuts up to 69 inches long.  Connect rails using Festool Guide Rail Connectors to make limitless cuts.

Call for Pricing

P13-1244

Festool Hole Drilling Guide Rails

The 13-1210 Guide Rail (55 inches) was designed specifically for use with Festool Routers and the 13-1244 Hole Drilling System to construct cabinets using the European frameless 32mm system for shelf pins and hardware.  Also, use the LR 32 System for line boring, or setting shelf pins in panels up to any length.  For cutting applications, the integrated splinterguard aligns perfectly to your cut line, saving set up time and serving as protection against tear out, on cuts both with the grain and across.  Guide rails can be easily connected using the accessory guide rail connectors for a rigid, secure and continuous connection.  Guide rails make work easier by taking the tool to the work, and save time and money by eliminating laborious measurements, rework and wasted material.  Use the 13-1244 Guide Rail (55 inches) with the Festool Plunge cut saw to cut material up to 49 inches.  Connect rails using Festool Guide Rail Connectors to make limitless cuts.

Quickly and easily align and machine holes for shelf pins and 35 millimeter cup hinges.  A fully integrated system, use your Festool routers, plunge saws, or jigsaws with the guide rail for expanded capability.  Guide strip reduces friction between the tool and guide rail for easier, more fluid cutting action.

Call for Pricing

P13-1332

Festool Parallel Guide

Achieve precise, consistent rip cuts with two adjustable stops that engage the edge parallel to the cut.  Adjustable to 25-19/32" (650 mm).  Guide rail not included.

Call for Pricing

P13-1333

Festool Parallel Guide Extension

Perfect for making narrow repetive rip cuts.  Attaches to parallel guide and accepts the same stops for cuts up to 7-11/16" (195 mm).  Guide rail not included. The Parallel Guide Extensions must be used in conjunction with the Parallel Guide (13-3322).

Call for Pricing

P13-1208

Festool Guide Rail Accessory Kit

A complete kit to maximize the value of your FS guide rails when used with your Festool plunge saw or router.  Quickly set angles for both mitered and compound cuts using the Angle Unit.  Make accurate repeat cuts using the Limit Stop.  Work more efficiently by attaching the included Deflector to the end of your rail to prevent your suction hose and cords from getting snagged.  Connect rails for limitless cutting with the included Connectors.  Use the two included Screw Clamps to for more secure, reliable cutting.  Also includes replacment Splinterguard for splinterfree cuts. All the things you need, packed neatly and conveniently in a Systainer.  No need to spend time looking for the pieces.   Angle Unit for mitered or compound cuts, Limit Stop for repeat cuts, Deflector for more efficient cutting, Connectors for limitless cutting, and more. Includes:  1 Angle unit,  1 Limit Stop, 1 Replacement Splinterguard (1400 mm), 1 Hose and Cord Deflector, 2 Guide Rail Connectors, and 2 Screw Clamps, all packed in a Systainer 1.

Call for Pricing

P13-1336

Festool LR32 Hole Drilling Set in Systainer

With the LR 32 Hole Drilling System from Festool, you can precisely and efficiently build cabinets using the European frameless 32 mm system.  Invaluable for placing cup hinges (35mm) or setting shelf pin holes (based on 32mm spacing) in casework, this portable line boring system allows you do in the field what has traditionally been a shop-only job, possible only with large stationary equipment.  For use with the Festool OF 1010  and OF 1400 router and guide rail system, the LR 32 System is supported by a 42in, 55in and a 95in rail (sold separately), to cover any size job.  Includes:  Guide plate, Centering mandrel, 2 edge stops, 2 linear stops, 2 clamps, Operating wrench, 35 mm carbide-tipped European hinge boring bit, 2 carbide-tipped 5 mm shelf pin bits (one for through holes and one for stopped pin holes).

Call for Pricing

P13-1202

Festool Quick Clamp

The perfect complement to the Festool MFT and Guard Rail systems.  The Festool Quick Clamps secure your workpiece for precision cutting, sanding, routing, or just about any other application.  Ratching mechanism enable easy locking and quick release for a secure grip on your material. Designed to work seamlessly with holes and channels on the Festool MFT Multifunction Table and can be inserted into bottom t-slot of Festool's FS Guide Rails for limitless poisitioning.  Clamping thickness 6-5/8".  Includes one clamps.

Call for Pricing

P13-1341

Festool Connector

Connect any number of guide rails for accurate, limitless cutting with Festool Guide Rail Connectors.  Connectors fit in integrated guide rail T-slots for secure cutting.  Includes 1 connector (2 are needed).  Can also be used to connect the Festool MFS templates.  Connect a limitless number of guide rails for long cuts with Festool Guide Rail Connectors.  Steel bars with 4 set screws secure connectors, ensuring straight cuts.

Call for Pricing

P13-1342

Festool FS-Rapid Clamp and Fixed Jaws

Designed for rapid positioning and clamping of Festool FS Guide Rails - includes fixed jaw and clamping jaw.  The FS-Rapid Clamp is particularly useful for fast and reliable clamping of guide rails to sheet good materials.  Mounts to guide rails using the continuous bottom t-slot for limitless adjustability. One-handed trigger action enables quick set up on material edge.  Fits all Festool guide rails.  Includes 1 clamp.

Call for Pricing

P13-1201

Festool Screw Clamps

Designed a key system componets to the Festool MFT and Guard Rail systems.  Festool Screw Clamps secure your workpeice for precision cutting, sanding, routing, or just about any other application.  Designed to work seamlessly with holes and channels on the Festool MFT Multifunction Table and can be inserted into bottom t-slot of Festool's FS Guide Rails for limitless poisitioning.  Clamping thickness 4-11/16".  Includes two clamps.

 

 

Call for Pricing

P13-1343

Festool 197" Splinterguard (replacement)

Festool FS Guide Rails are available in eight different lengths from 32 inches to 197 inches (800 - 5000 mm), providing the right length for straight, splinterfree cutting in just about any application. The integrated splinterguard is a critical guide rail system component, and after some time and heavy use, will need to be replaced. Replace your splinterguard as needed to ensure perfect alignment of your guide rail to the cut line, and to protect against tear out, on cuts both with the grain and across. Though you should expect many cuts from your original splinterguard, its life expectancy is heavily dependent on your application. Keep your cuts perfectly splinterfree by periodically replacing your splinterguard, especially if you are switching between blades, or using the guide rail with more than one saw.  Clear splinterguard enhances visibility of cut line.  Includes one 197in (5000mm) Clear Splinterguard.

Call for Pricing



Results 1 - 11 of 11