test

FESTOOL PLANERS



P13-1231

Festool HL 850 Planer

Festool's HL 850 Planer lets you cut flush to an ajacent surface because it can plane across the entire width of the rabbet.  Planer head is mounted to one side and sits flush with the opposite side of the planer housing.  The retractable side guard makes planing safer, and it swings up and to the side as the rabbet depth increases.  Quick blade changes - only three screws.  Thumb lock depth control makes depth setting a one hand operation.  Efficient chip extraction with left or right side mounting.  For best performance use with 13-1334 or 13-1335 Dust Extractors  and the D 36 hose.

Call for Pricing


P13-1369

Stardard Blade for Festool HL 850 Planer

For standard, smooth head.

Call for Pricing


P13-1370

Angle Stop for Festool HL 850 Planer

The Angle Stop for the Festool HL 850 E (13-1231) Planer provides a guide, or fence for secure and precise material planing at any angle between 0 and 45 degrees.  The large guide surface of the Angle Stop is ideally suited for making fine or coarse bevels on wood doors, enabling comfortable manuevering and consistent, reliable results.  Alternatively, the Angle Stop can be used in conjunction with the available Bench Unit (485017) to easily convert the HL 850 E Planer into an ultra-portable, miniature jointer, allowing you to precisely joint boards up to several feet long on the jobsite.  Bench Unit SE-HL (485017) and Planer sold separately.

Call for Pricing


P13-1201

Festool Screw Clamps

Designed a key system componets to the Festool MFT and Guard Rail systems.  Festool Screw Clamps secure your workpeice for precision cutting, sanding, routing, or just about any other application.  Designed to work seamlessly with holes and channels on the Festool MFT Multifunction Table and can be inserted into bottom t-slot of Festool's FS Guide Rails for limitless poisitioning.  Clamping thickness 4-11/16".  Includes two clamps.

 

 

Call for Pricing


P13-1371

Antistatic Hose for Festool HL 850 Planer

Festool's Antistatic hose design helps you work cleaner by preventing dust from accumulating on the exterior of the hose.  It helps you work more safely by preventing static discharge or shocks.  And you'll work more efficiently with a system that prevents clogging due to particulate buildup inside the hose.  A durable, pliable design withstands heavy use and prevents kinking, for longer service life and more efficient work.  Includes:  36mm x 3.5m (1 7/16 inch x 11.5 ft) Antistatic hose with rotating connector and reducing sleeve.

Call for Pricing




Results 1 - 5 of 5