test

FOAM FILLERS



P99-8130

PowerFoam™

PRODUCT DESCRIPTION
PowerFoam™ is a normal expansion polyurethane foam sealant which is supplied with a handy straw applicator. No special dispensing gun is necessary for use. Adheres to wood, metal, masonry and concrete. Seals gaps and joints, insulates, stops air infiltration and saves time and money. Ideal for use around pipes, wires and ductwork.
APPLICATIONS
PowerFoam™ is dispensed through a convenient straw applicator. Ideal for smaller jobs and one time use. Voids should be filled approximately 30-40% to allow for the final expansion of the foam. Recommended minimum curing time is 24 hours prior to scraping or painting.
TYPICAL USES
Insulating
• Floor / wall joints • Electrical junction boxes • Attics • Refrigeration units and pipes • Air conditioning systems
Filling
• Breaches in walls • Pipe penetrations in non-fire-rated walls • Voids in concrete forms • Underground utility ductwork • Sound dampening

Call for Pricing


P99-8136

TriggerFoam Pro™

TriggerFoam Pro™ Standard formula is a professional grade, gun applied, normal expansion, polyurethane foam sealant. Adheres to wood, metal, masonry and concrete. Seals gaps and joints, insulates, stops air infiltration and saves time and money. Ideal for use around pipes, wires and ductwork.
APPLICATIONS
Dispenses through a special gun that allows the user to control the flow rate and diameter of the bead for allowing precise placement of the foam. Voids should be filled approximately 30-40% to allow for the final expansion of the foam. Recommended curing time is 24 hours prior to scraping or painting.
TYPICAL USES
Insulating
• Floor / wall joints and openings • Electrical junction boxes • Attics • Refrigeration units and pipes
• Air conditioning systems
Filling
• Breaches in walls • Pipe penetrations in non-fire-rated walls • Voids in concrete forms • Underground utility ductwork • Sound dampening. • Stop and Go application product remains liquid in applicator until dispensed

Features

  • Easily adjustable applicator can dispense foam beads as small as 1/8"
  • High foam yield - up to 1.6ft3 per 29oz. can
  • Precision valve helps prevent pressure loss and prolongs shelf life
  • Hardened steel dispenser tip for longer life

Call for Pricing


P99-8135

TriggerFoam Pro™ All Season

PRODUCT DESCRIPTION
TriggerFoamPro™ All Season formula is a professional grade, gun applied, polyurethane foam sealant with an extended application temperature range, which allows use at temperatures as low as 23°F (-5°C). May be used at 14° F (-10° C) if can is stored at 77° F (25° C) for 8 hours before use. Adheres to wood, metal, masonry and concrete. Seals gaps and joints, insulates, stops air infiltration,and saves time and money. Ideal for use around pipes, wires, and ductwork.
APPLICATIONS
Dispenses through a special gun that allows the user to control the flow rate and diameter of the bead, allowing precise placement of the foam. Voids should be filled approximately 30-40% to allow for the final expansion of the foam. Recommended minimum curing time is 24 hours prior to scraping or painting.
TYPICAL USES
Insulating
• Floor / wall joints • Electrical junction boxes • Attics • Refrigeration units and pipes • Air conditioning systems
Filling
• Breaches in walls • Pipe penetrations in non-fire-rated walls • Voids in concrete forms • Underground utility ductwork • Sound dampening

Call for Pricing


P99-8133

TriggerFoam Pro™ Fireblock

PRODUCT DESCRIPTION
TriggerFoam Pro™ FireBlock is a professional grade, gun applied, polyurethane foam sealant designed to effectively block the spread of smoke and flame in Type V residential construction. It is more cost effective than fiberglass and caulks used for this purpose. NOT A FIRESTOP. Adheres to wood, metal, masonry and concrete. Seals gaps and joints, insulates, stops air infiltration and saves time and money. Ideal for use around pipes, wires and ductwork.
APPLICATIONS
Dispenses through a special gun that allows the user to control the flow rate and diameter of the bead, allowing precise placement of the foam. Voids should be filled approximately 30-40% to allow for the final expansion of the foam. Recommended curing time is 24 hours prior to scraping or painting.
TYPICAL USES
Insulating
• Floor / wall joints • Electrical junction boxes • Attics • Refrigeration units and pipes • Air conditioning systems
Filling
• Breaches in walls • Pipe penetrations in non-fire-rated walls • Voids in concrete forms • Underground utility ductwork • Sound dampening

Call for Pricing


P99-8134

TriggerFoam Pro™ Window and Door

PRODUCT DESCRIPTION
TriggerFoamPro™ Window and Door formula is a professional grade, low pressure, gun applied, polyurethane foam sealant . This foam does not distort window and door frames when expanded. Adheres to wood, metal, masonry and concrete. Seals gaps and joints, insulates, stops air infiltration and saves time and money.
APPLICATIONS
Dispenses through a special gun that allows the user to control the flow rate and diameter of the bead, allowing precise placement of the foam. Voids should be filled approximately 30-40% to allow for the final expansion of the foam. Recommended curing time is 24 hours prior to scraping or painting.
TYPICAL USES
Insulating: Low pressure formula will not bow window or door frames when expanded.

Call for Pricing


P99-8147

TriggerFoam Pro™ Cleaner

TriggerFoam Pro™ Cleaner removes uncured polyurethane sealant from inside and outside of application tools. May also be used to remove uncured foam from hands, clothing and unintended surfaces.  17 oz. can

Call for Pricing


P99-8128

TriggerFoam Gun

Easily adjustable applicator can dispense foam deads as small as 1/8".

 

High foam yield - up to 1.4 - 1.6'  3 per 29 oz. can.  Precision valve helps prevent pressure loss and prolongs sheld life.  Hardened steel dispenser tip for longer life.

Call for Pricing




Results 1 - 7 of 7