HEAD PROTECTION

Custom Printed Hard Hats


Have your logo custom printed onto any of our hard hats to your specifications. Multi-color printing available. Colony offers custom printed hard hats by Bullard, MSA, and Fibre-Metal. Ask your Colony representative for more details.  800-698-0781

 

Hard Hat Care


Your Checklist


• Make sure your hat fits right. There should be approximately 1" between the harness and the shell so air can circulate and keep your scalp cool. If your hat is too loose, it will fall off when you bend over. Too tight and it may cause headaches.


• Wear a color-coded hat if you need identification. Don't paint or scratch your hard hat to identify it.


• Add light-attracting tape to your hat if you work at night or in darkness. This will make it easier for others to see you.


• Inspect your hard hat every day. Look for gouges and cracks. Check for frayed or broken sweatbands and straps.


• Carry cigarettes or other personal belongings somewhere other than in your hat.


• Clean the shell of your hard hat at least once a month to remove oil, grease, chemicals and sweat. Soak it for five minutes in mild detergent and water that's at least 140°F (60°C). Then wipe the hat and let the air dry it. Clean the hat according to the instructions provided.


• Take good care of your hat; don't drop it, throw it or drill holes in it.


• Sunlight and heat can rot the harness and straps. Don't leave your hard hat on the front or back window ledge of your car.

P14-2674

Milwaukee Safety Helmet

Milwaukee Type 2 Safety Helmets offer protection from top and side impacts. BOLT™ compatible with four BOLT™ accessory slots and two universal accessory slots that easily integrate additional personal protection equipment and accessories. Include a MILWAUKEE® BOLT™ Headlamp Mount that works with most headlamps for easy, secure attachment, and a BOLT™ Marker Clip allows for easy access to pens and markers. ANSI/ISEA Z89.1 Type 2.  Available in vented and nonvented.

Call for Pricing

P10-0967

Milwaukee Front Brim Hard Hat with BOLT™ Accessories

The hard hat features a MILWAUKEE® BOLT™ Reversible Headlamp Mount that works with most headlamps for easy, secure attachment. Four BOLT™ accessory slots and two universal accessory slots allow you to easily integrate additional personal protection equipment and accessories onto the helmet. For improved comfort, all of our hard hats feature a ratcheting suspension that you can quickly adjust. A BOLT™ Marker Clip allows you to easily access pens and markers. A sweatband is also included and is moisture wicking to provide you with additional comfort. All of our construction hard hats are ANSI/CSA approved and are available in vented option for improved airflow.

Call for Pricing

P10-0968

Milwaukee Full Brim Hard Hat with BOLT™ Accessories

The hard hat features a MILWAUKEE® BOLT™ Reversible Headlamp Mount that works with most headlamps for easy, secure attachment. Four BOLT™ accessory slots and two universal accessory slots allow you to easily integrate additional personal protection equipment and accessories onto the helmet. Adjustable ratcheting suspension. A BOLT™ Marker Clip allows you to easily access pens and markers. A sweatband offers moisture wicking. ANSI/CSA approved and are available in vented option for improved airflow.

Call for Pricing

P14-2723

Milwaukee BOLT™ Sunshade

Blocks harmful UV rays. Moisture-wicking and antimicrobial shade allow you to stay cool, dry fast while preventing odor and bacteria. Clips on the hard hat sun shade. The dedicated earmuff slots and BOLT™ dedicated slots allow you to use additional accessories simultaneously.

Call for Pricing

P14-2724

Milwaukee BOLT™ Sun Visor

BOLT™ Sun Visor provides 360° UV protection. Designed with a tinted brim to reduce glare without reducing your upward vision. The antimicrobial shade prevents odor and bacteria, while the mesh portion keeps you cool. The front visor can be used with face shield or eye protection when flipped back into retention slots allowing you to use multiple accessories simultaneously.

Call for Pricing

P14-2726

Milwaukee BOLT™ Earmuffs

Cap-mounted earmuffs provide an adjustable fit thanks to the center-mount design. The earmuffs also allow for balanced wear with a 360⁰ rotational arm that can pivot to multiple storage positions when not in use. These earmuffs have the indicated NRR to protect you against hazardous noise and are CSA Class A certified. Our earmuffs are a part of the BOLT™ System that allows users to secure accessories simultaneously.

Call for Pricing

P14-2728

Milwaukee BOLT™ Half Face Shield for Milwaukee Safety Helmet

Our BOLT™ Eye Visor is designed to provide you with the best fit and easy headlamp use. These Z87.1+ eye visors are classified as spectacles and can be used in place of safety glasses. The eye visor pivots and adjusts to provide a comfortable and secure fit for a wide variety of face shapes.

Call for Pricing

P14-2732

Milwaukee BOLT™ Full Face Shield

BOLT™ Full Face Shield is designed to give you long-lasting visibility. Our ANSI Z87.1+ rated face shield is treated with a fog-free interior coating and an anti-scratch exterior hard coating for longer product lifetimes. Attaching and removing the shields is made simple and tool-free with secure snap-in snap-out covers. For use with both Milwaukee safety helmets and hard hats.

Call for Pricing

P14-2736

Milwaukee BOLT™ Mesh Full Face Shield

Designed with a highly durable stainless-steel mesh for longer product lifetimes. With optimal shield width and mesh pattern, the face shield offers a consistent wide and clear field of view. Removing and replacing the shields is made simple and tool-free with secure snap-in snap-out covers.

Call for Pricing

P14-2737

Milwaukee BOLT™ REDLITHIUM™ Headlamp

Delivers 600 lumens of TRUEVIEW™ high definition flood lighting paired with a 70° pivoting light head for full illumination for any task. Our rechargeable headlamp is designed with the cam lock mounted battery pack in the rear for maximum maneuverability and security in tight spaces and a balanced design for all-day use. Four light output modes: High, Medium, Low, and Eco for 32 hours of runtime to maximize light output or extend runtime. The light is IP54 rated for water and dust resistance and can withstand up to 2M drops, surviving the toughest conditions on and off the jobsite. The BOLT™ REDLITHIUM™ Headlamp is powered by the REDLITHIUM™ USB 3.0AH Battery, providing all-day run-time, more recharges, and 3x faster charge time.

Call for Pricing

P14-2765

Kask Zenith X2 Air Hard Hats

Designed with eight air intakes that enhance breathability and comfort. Lightweight external shell with exponential better performance. Excels in impact absorption, specially at lower temperatures. Helmet internal shell designed with a low-density inner core optimized for protection for top impacts. Dry and moisture-wicking fabric with silver ion antibacterial treatment for enhanced comfort. Helmet is designed with integrated slots that enable visor adapters to mount face and eye protection to the helmet. Size adjustment system that adapts to head shapes to create a personalized, secure fit. Chinstrap designed with eco-leather, that provides high degrees of comfort and significantly reduces irritation to the skin. New rear adjustment points for a more personalized fit. The Kask hard hat offers longevity because the suspension does not need to be replaced every year and the hard hat has a 10-year compliance life. Lime color clasp indicates that the helmet meets EN 12492 standard.

Call for Pricing

P16-8196

Kask Primero Air Hi-Viz Hard Hat

Polypropylene HD external shell is lightweight with excellent impact absorption. Ventilation channels with 14 air intakes shaped for preventing debris entry and internal channels for enhanced breathability and wearer comfort. Moisture-wicking fabric technology for all-day comfort. Chinstrap loop enables the wearer to securely attached the helmet to a harness. Helmet size adjusting system that allows for an easy and secure fit by turning the large diameter dial. The system moves up and down to adapt to a range of head shapes. ANSI Z89.1 TYPE I - CLASS C HT LT EN 12492.

Call for Pricing

P13-9166

KASK Superplasma Vented Hard Hats

The KASK design is widely used throughout Europe.  There are several advantages to this style hard hat.  The KASK hard hat fits like a bicycle helmet and will not fall off once it is secured.  Therefore, in the case of a fall the worker’s head is still protected and it also prevents that hard hat from falling and injuring someone else.  The KASK hard hat offers longevity because the suspension does not need to be replaced every year and the hard hat has a 10-year compliance life.

Maximum ventilation with air intakes. The air intakes and the internal outflow channels guarantee effective breathability. Chin pad with ecoleather chinstrap is washable and comfortable.  Strong nylon external lamp carrying clips that are compatible with headlamps with elastic bands.   Special loop on the chinstrap allows the helmet to be connected to the harness when not in use.  High-tech 3D fabric that dries very quickly.  Provided with integrated slot for earmuffs with bayonet attachment. ANSI Z89.1-2014 / CSA Z94.1-2015

Call for Pricing

P16-8172

Kask Primero Hard Hat

Polypropylene HD external shell is lightweight with excellent impact absorption. Moisture-wicking fabric technology for all-day comfort. Chinstrap loop enables the wearer to securely attached the helmet to a harness. Ergo fit system moves up and down and cradles back of neck for a secure fit. Helmet size adjusting system that allows for an easy and secure fit by turning the large diameter dial. The system moves up and down to adapt to a range of head shapes. ANSI Z89.1 TYPE I - CLASS C HT LT EN 12492.

Call for Pricing

P14-2760

KASK Zenith X2 Hard Hats

The KASK hard hat fits like a bicycle helmet and will not fall off once it is secured. Therefore, in the case of a fall the worker’s head is still protected and it also prevents that hard hat from falling and injuring someone else. Lightweight external shell with exponential better performance. Excels in impact absorption, specially at lower temperatures. Resists yellowing and degradation. Helmet internal shell designed with a low-density inner core optimized for protection from top impacts. A size adjustment system which integrates three components for all-day comfort. A new, double diameter dial allows for easier size adjustments. Ergonomic side wings ensure a fast and secure fit against the back on the head. Chinstrap designed with an updated lateral adjustment divider with additional adjustment point for a more precise fit. ANSI Z89.1 Type I, Type II - Class E All around protection against impact and penetration including front, rear, and sides.

Call for Pricing

« Start « Prev 1 2 Next » End »»

Display Results per Page

Results 21 - 35 of 35