test

MAXIS CABLE PULLING SYSTEMS



P12-0110

Maxis 1K Puller

This economical cable puller pulls wire faster, easier and safer on long and difficult runs that would normally be pulled by hand. This lightweight puller takes minutes to set up, with one person and no anchoring required. Excellent for working in small boxes. The Maxis 1K operates at 60 ft. per minute, and will pull up to 1,000 lbs. A heavy duty canvas tool bag that fits the Maxis 1K and all associated parts is included. Please note: Milwaukee Hole-Hawg® is sold separately, and not included with the purchase of the Maxis 1K.

Call for Pricing


P13-0854

Maxis 3K Puller

Maxis 3K Puller is a high speed, lightweight 3,000 pound cable puller.  One person, 2 minute set up and operate.  Quickly adapts from underground to overhead pulls. 2 Pulling speeds: 25 fpm on low (at no load) and 100 fpm on high (at no load). Quickly adapts from underground to overhead pulls. Lightweight at 51 lbs and no need to bolt to the ground on most pulls. Able to pull up to 8 ft of wire out of the conduit.  Versatile, can adapt to virtually any wire pull.  Can be anchored to most trucks' standard 2" receiver hitch.  Includes 5 conduit adapters 2” – 4” and puller cart with tool bag.  Milwaukee® Super Hawg™ also included. Manufactured by Southwire.

Call for Pricing


P13-0851

Maxis® 6K Cable Puller

Maxis® 6K Cable Puller offers fast set-up and operation.  One person, 2 minute set up and operate.  Quickly adapts from underground to overhead pulls.  6,000 lb pulling force.  2 Pulling speeds: 12 fpm on low (at no load) and 44 fpm on high (at no load).  Lightweight at 76 lbs and no need to bolt to the ground on most pulls.  Versatile, can adapt to virtually any wire pull.  Can be anchored to most rucks' standard 2" receiver hatch.  Able to pull up to 9 ft of wire out of the conduit.  Includes 5 conduit adapters 2” – 4”.  Puller cart with tool bag included.  Milwaukee® Super Hawg™ included. Manufactured by Southwire.

Call for Pricing


P13-0850

Maxis® Extreme Duty Cable Puller

Smooth elevation control: operates with handle or 18V cordless drill helping to eliminate any lifting.  Pulls out 10 ft of extra wire (without extending the boom).  Gear reducer design allows for increased efficiency, durability and power while maintaining low operating temperature.  10,000 lbs. peak pulling force with a continuous pulling rating of 7,000 lbs.  Conduit adapter sizes 2” – 4” included.  Milwaukee® 4004 core drill motor, 2 speeds, 4 AMP.  Self-contained: ready to pull with no need for additional parts.  Single person set up and operations; quickly adapts from underground to overhead pulls.  Single foot control.  Collapsible down to 40”H x 26” W x 70” L. Telescoping front and mid section.  Manufactured by Southwire.

Call for Pricing


P12-0126

Southwire SIMpull™ Cable Guide System

Integrated guidance system allowing wire and cable to be routed from a reel into a conduit or cable tray without human intervention.  Designed to eliminate the manual handling of service and feeder conductors during wire pulls. Completely customizable for any wire and cable installation. Locking universal joints to assist in directional layout.  Universal clamps attach the system to the reel jacks, switchgrear or panel box.  Customizable tubing assemblies to fit and any layout desired.  Roller guides direct and protect wire and cable. Specialized storage cart for ease of transportation.

Call for Pricing


P13-0858

Maxis® Triggers

Maxis® Triggers dual remote foot switch.  Each pedal has the ability to control the puller's power source.  Works with any Maxis® cable puller.  Saves time by avoiding unnecessary stops and restarts and helps reduce the risk of wire feeding mishaps. Led lights on each footswitch indicate the cable pullers status. Amp type force gauge monitors pull tension based on the number of amps the motor is drawing.  Useful when superior accuracy is not required (accuracy is +/- 20%). Amp usage is then translated into a tension reading shown on the display.  The ability to stop the cable pull from either side immediately.  Increases safety by reducing issues assocated with feeding wire. Manufactured by Southwire.

Call for Pricing


P13-0857

Maxis Tripods

Call for Pricing


P13-0871

Southwire™ Triggers® Wireless Safety Switch System

Safety system designed to control the input power of any piece of jobsite equipment; works with all brands of electrically driven equipment.  Saves time by avoiding unnecessary stops and restarts.  High visibility LED status lights.  Monitors amperage draw indicating when to switch puller to low speed. Triggers® Wireless Safety Switch System is UL and FCC Certified and carries an IP55 rating. Foot controls contain dual redundant activation switches. Military grade 3.4 amp hour lithium ion battery packs.

Call for Pricing




Results 1 - 8 of 8