METACAULK FIRESHIELD



P26-0461

Metacaulk® 1000 Intumescent Firestop Caulk

Metacaulk® 1000 is a water-based, flexible, highly intumescent sealant designed for use on metal, insulated, fiberglass and plastic pipes. It can also be used for top of the wall construction joints, as well as power and telephone cables. Sound Transmission Class (STC) rating 62, Tested in a UL 411 wall assembly/section to ASTM E90.  Metacaulk® 1000 will prevent the spread of flames, smoke, hot gases and water through joint openings and through-penetrations. No dilution or mixing required for use. No special skills are necessary for installation.  Color: Red.

Call for Pricing


P26-0465

Metacaulk® 150+ Firestop Caulk

An elastomeric, one-component, general purpose, fire-rated sealant and smoke seal for construction joints and through-penetrations. A water-based, non-sag caulking grade sealant that is easy to apply as well as to retrofit. Can be applied to horizontal and vertical surfaces. Cures to a paintable flexible seal. Suitable for areas of dynamic movement. Application temperature 40°F to 120°F. An economic choice for most common applications. Sound Transmission Class (STC) rating 65, The test was performed in accordance with ASTM E90, Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions.

Call for Pricing


P26-0404

Metacaulk® 350i Fire Rated Sealant

Metacaulk® 350i is a one-component, general purpose fire-rated sealant and smoke seal for construction joints and through-penetrations.  An intumescent, water-based, non-sag caulking grade sealant that is easy to apply and great for retrofits. It cures to an elastomeric seal that is suitable where dynamic movement is expected. Can be applied to horizontal and vertical interior surfaces. Application temperature 40°F to 120°F.  Color: Red.

 

Call for Pricing


P26-0457

Metacaulk® 835+ Firestop Sealant

Metacaulk® 835+ is for applications that require a silicone-based firestop. Designed for use with PVC pipe on closed (pressure) systems, EMT, insulated and uninsulated steel pipe, construction and control joints and interior expansion joints. Flexible, non-sag and low odor sealant for exterior or interior use. Used in systems where dynamic movement is expected. Application temperature -20°F to 120°F. Color: gray.

Call for Pricing


P26-0431

Metacaulk® 1200 Firestop Spray

Metacaulk® 1200 is a single component, highly elastomeric water based firestop mastic for general construction gaps and voids. Metacaulk 1200 caulk grade is a non-sag sealant that is easy to apply from a caulk gun or troweled. It cures to an elastomeric membrane seal that is suitable where dynamic movement is expected. Can be applied to horizontal and vertical surfaces for interior and covered exterior application that cures to a paintable elastomeric membrane seal. Application temperature 40°F to 120°F.  Color: Red.

Call for Pricing


P26-0439

RS136 Fireblock/Draft Stop Caulk

Very economical water based instumescent, non-combustible draft stop caulk meeting ASTM E 136. Used for sealing all types of penetrations where building codes require the use of a non-combustible product tested to ASTM E 136.Easy to install. Available in 10.3 fluid ounce cartridges. Also used as an acoustical sealant. 12 per case. Color: Red.

Call for Pricing


P26-0468

Metacaulk® FRM Fire Rated Mortar

Metacaulk® FRM Fire Rated Mortar has load bearing characteristics and is suitable for economically firestopping large openings for through-penetrations in fire-rated walls and floors. It can be used with power cables, fiber optic or telephone cables, aluminum or steel cable trays, EMT, copper, steel or cast iron pipe.  Color: Light Red.

Call for Pricing


P26-0478

Metacaulk® Composite Sheet

Metacaulk® Composite Sheet is a rigid, fire resistive panel used to seal penetrations and restore the fire-rating to floors, ceilings or walls in which a large opening has been made for the passage of penetrating items. It is made of a reinforced, highly intumescent material which is bonded on one side to a steel sheet.

Call for Pricing


P26-0471

Metacaulk® Pipe Collars

Metacaulk® Firestop Collars are prefabricated firestop systems for through-penetrations using PVC, CPVC, ABS, PVC foam core, ABS foam core, FRPP, PEX pipe and electrical cable. UL classified for both open and closed systems.  Feature an easy locking mechanism that assures simple installation. The collar’s design greatly reduces the time and expense required to install competitive collars.

Call for Pricing


P26-0474

Metacaulk® Firestop Wrap Strip

Metacaulk® Wrap Strip is a flexible strip of highly intumescent firestop material used primarily for plastic and insulated pipe applications. When exposed to heat, it expands and forms a strong char to seal off the penetration and prevent the passage of flames and hot gases. Easy to apply – simply wrap the required number of strips around penetrating item and push into annular space. May also be used with a universal collar.

Call for Pricing


P26-0434

Lectra-Stop™ / BoxGuard Fire Rated Intumescent Pads

Self-adhesive, intumescent pads for inserting on the back wall of single and double gang electrical outlet boxes. Used for providing 2-hour fire rated wall assemblies when electrical outlet boxes have been installed “back to back” rather than 24 inch on center. Non conductive. For installation only by licensed electricians complying with NEC 70 or other applicable codes.

Call for Pricing


P26-0476

Metacaulk® Firestop Pillows

Metacaulk® Firestop Pillows are intumescent and designed for use primarily in large temporary or frequently accessed openings with cables, cable trays, blank openings or multiple penetrating items. In the event of a fire, Metacaulk® Firestop Pillows will prevent the spread of flames and hot gases through the openings.

Call for Pricing


P26-0469

Metacaulk® FRS Fire Rated Putty Stick

Available in two forms: Putty Sticks and Putty Pads. Putty Sticks are used to seal around penetrating items through fire rated walls, floors and blank openings. For use with electrical cables, conduit and metal pipe. Hand moldable with no curing time required. Will not dry out and can be re-used as additional penetrating items are removed or installed. Putty Pads are used to maintain the hourly rating of fire rated walls containing electrical outlet boxes and to reduce sound transmission. Only one pad thickness (1/8'') is required for a 1 or 2 hour fire rating. Required by Building Codes in rated partitions where horizontal separation of opposite facing boxes is less than 24'' horizontally. Putty Sticks & Pads are sold in full box quantities only.

Call for Pricing




Results 1 - 13 of 13