POWERS POWDER ACTUATED FASTENERS SELECTION GUIDE1

Pin Dimensions Pin Applications Load Power Levels
PINS
.300 Head Drive Pin 1/2 - 1 1/2

1 3/4 - 3

.300 Head Drive Pin with
Top Hats		 1/2 - 1

.300 Head Drive Pin with Washer 3/4 - 1 1/2
2 - 3

Head Drive Pins with 1-7/16”
insulation washer		 2 1/2 - 3

.300 Head Step Shank Drive Pins 3/4 - 1


PTZ .300 Head Pin with Washer 2 1/2 - 3
Type 316 SS .300 Head Pin
with Washer		 2 1/2 - 3
10mm Head Drive Pins 1 - 3

8mm Head Drive Pins 5/8 - 1 1/2

1 5/8 - 2 7/8


8mm Head Drive Pins with
Tops Hats		 5/8 - 1

8mm Head Drive Pins
with Washer		 1 - 1 1/2

2 - 2 7/8

PTZ 8mm Head Pin with Washer 3

6mm Head Drive Pins 5/8 - 2 7/8

3/8” Head Drive Pins 1/2 - 7/8

Ballistic Point™ Drive Pins 1/2 - 7/8

Ballistic Point™ Step Shank
Drive Pins		 1 1/4

1 7/8


1/4” - 20 Threaded Studs 1/2 - 1 1/4 1/2 - 1 1/4

3/8” - 16 Threaded Studs 3/4 - 1 1/4 1 1/4

Ceiling Clip Assemblies
(.300, 8mm & Ballistic Point)		 1 - 1 1/4

Ceiling Clip Assembly for
Ladd Tool (L1600)		 1 1/2

BX - EMT Conduit Clip
Assemblies (.300 & 8mm)		 1 - 1 1/4

Rebar Basket Clip
Assemblies (8mm)		 1 1/4 - 2 7/8

Forming Pins 1 3/4 - 2 1/2

Hammer Drive Pins 3/4 - 3

LOADS
.22 Caliber “A” Single Load

.22 Caliber Single Loads for
ITW Ramset® Ladd (L1600)

.25 Caliber Disk Loads

.25 Caliber Disk Loads (Red)

.25 Caliber Single Loads

.27 Caliber Single Loads

.27 Caliber Single Long Loads

.25 Caliber 10 Load Strips

.27 Caliber 10 Load Strips

.27 Caliber 10 Load
Strips (Purple/Black)

.27 Caliber Safety Strips™