test

ROOF ANCHORS



P14-1044

Ridge-It Anchor

Provides an attachment location on each side of the ridge for one worker only. Installs easily on any pitch roof application, whether it’s new construction or retrofit. The D-rings are stainless steel, and the rest of the anchor is galvanized for weather-resistance. Lowest profile anchor on the market, thereby not detracting from the aesthetics of the roof.

Call for Pricing


P14-1042

Temper Reusable Anchor

Temper Anchors are tough, long-lasting, reusable and fits up to 12/12 roof pitch. Heavy-duty construction allows the anchors to be installed and removed at the completion of the job. These anchors must be installed over a truss and can be fastened with either screws or duplex nails, and provide a fall arrest attachment point for one worker. Meets 5,000 lb. load rating for fall arrest use.

Call for Pricing


P14-0387

Reusable Roof Anchor

Designed to be used as an anchorage connector for personal fall arrest or restraint systems on a flat or sloped wood roof structure. Simply fasten into the sheathing and joist, rafter etc. with a 16D nail. Comes complete with a cadmium plated forged alloy steel D-ring. Includes twenty 16D nails.

Call for Pricing


P14-1122

Titan B-Compliant™ Roof Kits

Helps residential contractors comply with the latest OSHA requirements.  Rope grab with permanently attached 3-ft lanyard with shock absorber pack.  High-strength, 5/8" diameter polypropylene rope lifeline with locking snap hook - enables quick attachment to roof anchor.  Reusable stainless steel roof anchor bracket with plated D-ring.  Waterproof storage container.   Kit includes:  Lightweight full-body harness with 3-point adjustment for easy adjustment and comfortable fit.

Call for Pricing


P14-1041

Bucket Of Safe Tie

A complete fall protection system for both commercial and residential roofers. Each kit contains the following:
• 5 Gallon Bucket
• Universal Fit Harness
• 50 ft. Vertical Lifeline Assembly
• Available with choice of 5 Snappy Anchors or 1 Temper Anchor.

Snappy anchors provide a safe tie-off point for temporary work where a permanent anchorage point is not necessary. Snappy anchors can be easily formed by hand to fit the shape of any pitch roof you may be working on. Once the job is complete, Snappy needs to be bent over and the roofing material installed directly over the destroyed anchor. Meets 5,000 lb. load rating for fall arrest use. Only one worker can be tied off to the Snappy Anchor.

Temper Anchors are tough, long-lasting, reusable and fit to the pitch of the most difficult roof. Heavy-duty construction allows the anchors to be installed and removed at the completion of the job. These anchors must be installed over a truss and can be fastened with either screws or duplex nails, and provide a fall arrest attachment point for one worker. Meets 5,000 lb. load rating for fall arrest use.

Call for Pricing




Results 1 - 5 of 5