TOOL POUCHES & HOLDERS

All Klein tool pouches and holders are made of the finest materials available. A wide variety of designs insures that there is a pouch to suit virtually every individual preference and need. If you cannot find a particular tool pouch or holder that you like, please call us and we will send you a listing of all Klein’s leather products.

P11-6800

Klein Leather Tool Pouch

A roomy pouch for electricians, servicemen and maintenance workers. Five large utility pockets for a wide variety of tools such as pliers, wrenches, wire cutters. Smaller pockets for screwdrivers, scratch awls. Knife snap, chain tape thong, and tape rule holder are conveniently located on the front. Made of leather. With tunnel loop to fit belts up to 2 1/2" wide. Overall size: 11" x 10".

Call for Pricing

P11-6802

Klein Leather Tool Pouch

A multi-pocketed, all leather pouch made for electricians and other professionals. Soft, pliable, and moisture resistant to retain flexibility. Has two closed-end pockets for long screwdrivers; two small pockets for stubby screwdrivers; big double pocket for pliers; special partitioned pocket for 9 inch torpedo level; special pockets for wire stripper, awl, and steel tape; and two more pockets for additional tools. Knife snap. Anchored tape thong with snap release and rivet swivel. Slotted pouch fits belts up to 2 3/4" wide. Riveted and stitched. Overall size: 10" x 10 1/2".

Call for Pricing

P11-6810

Klein Nail/Screw & Tool Pouch

Has heavy hammer loops on both sides, allowing for convenient use by right or left handed workers. Large flared inside pocket for nails; small pocket in front, plus four small-tool side pockets. Has tunnel loop for attaching belts up to 3". Made of genuine cowhide. Size: 11" x 11 3/4".

Call for Pricing

P11-6804

Klein Nail/Screw & Tool Pouch Combination

Exceptional utility and convenience in a durable belt with double pouch and tape-rule holder combination. Consists of genuine cowhide left-and-right hand nail-and-tool pouches, a fully adjustable polyweb belt, and tape-rule holder for 20' and 25' tapes. Heavy hammer loops; large, flared inside pocket for nails; a smaller pocket in front; three small tool pockets; and tunnel loop to fit any belt up to 3" wide. Complete combination including left and right hand nail-and-tool pouches and tape rule holder.

Call for Pricing

P11-6812

Klein Hammer Holders

Leather hammer holders with heavy-metal hammer loop riveted to panel.

Call for Pricing

P11-6814

Klein Hammer Holder

Heavy-metal hammer loop is riveted to panel. Hold-down strap riveted to hammer loop, unsnaps with downward pressure only, to resist upward pressure of hammer. Two snap-on positions for large and small hammers. Tunnel loop fits belts up to 4" wide. Made of leather. Size: 4 5/6" x 10".

Call for Pricing

P11-6817

Tape Rule Holder

Cut out sides for easy access to tape. Slotted for attaching to belts up to 2 3/4" wide. Made of leather. Size: 4-1/2" x 7". Holds 20’, 25’, and 30’ tape measures.

Call for Pricing

P11-5431

Utility Knife Holder

Holder designed to hold most brands of utility knives. Fiber liner resists cut-through. Slotted to fit belts up to 2 3/4" wide. Made of leather. Size: 2 3/4" x 8".

Call for Pricing

P11-6801

Bull-Pin Holder

Specifically designed to hold bull pins. Tunnel loop permits use on wider belts or to slide over D-rings, buckles, and other accessories up to 3 1/2". Made of leather. Size: 3 1/4" x 12 1/4".

Call for Pricing

P11-5812

Klein Pliers and Folding Rule Holder

Pockets for side cutting pliers (7", 8" or 9") and a folding rule (6').  Slotted to fit belts up to 2" wide.  Riveted leather construction ensures long life.  Made in USA.

Call for Pricing

P11-6821

Klein Erection Wrench Holder

Contains tool slots for 2 erection wrenches. Tunnel loop permits use on wider belts or to slide over D-rings, buckles, and other accessories. Made of leather. Size: 6" x 9-1/2".

Call for Pricing

P11-6039

Klein Cordura® Pouch

Universal Cordura® pouch fits on any belt up to 2-1/4” wide. Can be used for nails, screws, wire nuts, small tools, holds a 35ft tape measure as well. Has two inside plastic loops able to fit pencils, screwdrivers or markers.

Call for Pricing

P11-6830

Klein Tie-Wire Reel

Rugged, light weight reel feeds pre-coiled wire smoothly, easily, and quickly. Saves time and reduces wasted wire. Handles all types of tie-wire and is designed for left or right hand use. Reel is smooth aluminum alloy with wear parts made of steel. Has large, comfortable rewind knob, nylon bushing for smooth, trouble-free operation, and easily removed cover plate that permits quick, convenient reloading. Size: 6-1/4" diameter x 2-25/32" wide. Model 27400.

Call for Pricing



Results 1 - 13 of 13