test


Item P13-1214

Festool TS 75 EQF Plunge Track Saw

Experience the incredible power of the TS 75 plunge cut saw. No other saw comes close to its power and pinpoint accuracy. Capable of cutting material that is 2-3/4" thick, this saw will leave an edge that is both burn and splinter-free, creating edges that are clean enough to glue without any further prep work. The TS 75 is suitable for cutting solid doors, truing rough lumber, cutting out window frames, and a host of other applications. Save time and create matched panels by cutting stacked sheet goods with one cut. When used with Festool guide rails (included), you can achieve perfectly straight and splinter-free cuts. Spring-loaded riving knife (splitter) keeps the cut kerf open so that the material does not pinch the blade. This reduces the chance of kickback. The slip clutch helps to minimize the risk of a kickback and minimizes wear on the blade, gear case, and motor. Blade changes are easier and safer using the FastFix system which locks switch and arbor simultaneously for easy arbor bolt removal.


Specifications  
Power consumption 1,600 Watts
Idle engine speed 1?350 - 3?550 RPM
Cutting depth at 45° 2-1/8"
Cutting depth 0" - 3”
Saw blade diameter 8-1/4"
Weight 13.6 lbs.

Item Description Attributes
13-1214 Festool TS 75 EQF Plunge Track Saw (Imperial)