Item P42-2163
Tool Steel - 1 1/8" Hex Shank
Item | Description | Attributes |
---|---|---|
42-2163 |
Type: Narrow Chisel Application: General chipping work. Overall Length: 20" |
|
42-2161 |
Type: Moil Point Application: Starts holes in concrete slabs. Overall Length: 20" |
|
42-2164 |
Type: 3" Chisel Application: Wide chisels with (2) 60° cutting angles clean concrete, scale, & rust, cut troughs & some asphalt. Overall Length: 20" |
|
42-2166 |
Type: Superkut Chisel Application: Premium chisel design gives faster penetration & requires fewer resharpenings than flat chisels. Overall Length: 20 1/2" |
|
42-2167 |
Type: 5" Asphalt Cutter Application: Cuts asphalt or hard ground. (Not for concrete.) Overall Length: 19" |
|
42-2168 |
Type: 3" Digging Chisel Application: Cuts very thick asphalt, digs deeply into hard ground. (Not for concrete.) Overall Length: 22 1/2" |
|
42-2170 |
Type: Frost Wedge Application: Peels away frozen ground in layers. Overall Length: 24 1/2" |
|
42-2169 |
Type: 5 3/8" Clay Spade Application: Digs clay, hard packed gravel, dirt. Overall Length: 21" |
|
42-2172 |
Type: Ground Rod Driver Application: Drives ground rods. Overall Length: 15 1/2" (inside dia. 1", inside depth 3") |
|
42-2171 |
Type: Spike/Pin Driver Application: Drives anchoring pins for concrete forms. Overall Length: 14 1/2" (inside dia. 1 3/4", inside depth 3/8") |
|
42-2173 |
Type: Tamper Shank Application: Compacts dirt, tamps asphalt. Overall Length: 15 1/2" |
|
42-2124 |
Type: Tamper Plate Application: Compacts dirt, tamps asphalt. Overall Length: 6"L x 6"W |
|
42-2125 |
Type: Tamper Plate Application: Compacts dirt, tamps asphalt. Overall Length: 8"L x 8"W |