MECHANICAL ANCHORS

Screw-Bolt+ Power Bolt+™ Power-Stud™ + SD1
Lok-Bolt AS™ SPIKE® Pin Anchors
Masonry Fasteners Drop-ins Hollow-Set Drop-In
HangerMate® Anchors Calk-In™ Toggle Bolt
Polly™ Hollow Wall Anchor Zip-It® Rod Couplings
Power Stud® Mechanically Glavanized and Stainless Steel Hangermate®+


P99-8954

Bang-IT®+ Bridge Bar

The Bridge Bar allows for optional placement of Bang-It+ inserts through the flute incline or positioned over the lower flute of steel deck profiles.

Call for Pricing

P99-8996

Push-In Coupler

Push-In Thread Couplers have one end that does not require turning threaded rod elements for placement during installation. These high performance couplings can be ideal for applications such as mounting prefabricated hardware and hanger assemblies.

 

 

Call for Pricing

P99-7540

Bang-It™ Cast-In Place Inserts

Base Material: Concrete, Lightweight Concrete

Size Range: 1/4 " to 3/4" Anchor Material

Anchor Material: Carbon Steel and Engineered Plastic and hanger assemblies.

Bang-It+ concrete inserts are designed for installation in and through composite steel deck (i.e. “pan-deck”) used to support newly poured concrete floor or roof slabs. The Bang-It+ concrete inserts are specifically designed to provide hangar attachments for mechanical, electrical, plumbing (MEP) and fire protection. After installation, the protective sleeve of the insert protrudes below the surface of the deck. The sleeves are color coded by size and allow overhead attachment of steel threaded rod in sizes ranging from 1/4" to 3/4" in diameter. The sleeve prevents sprayed fireproofing material and acoustical dampening products from clogging the internal threads of the insert. It also prevents burying, masking or losing the insert location. A hex impact plate offers resistance to rotation within the concrete as a steel threaded rod is being turned during installation. A push-in thread version is also available which does not require turning the threaded rod or threaded bolt during installation. which can be ideal for applications such as mounting prefabricated hardware

Call for Pricing

P99-7562

Bang-It™ Accessories

Call for Pricing

P99-7550

Wood Knocker® II+ Type Cast-In Inserts

Base Material:
Concrete, Lightweight Concrete
Size Range:
1/4" to 3/4"
Anchor Material:
Carbon Steel and Engineered Plastic
Wood-Knocker II+  concrete inserts are installed onto forms used to support newly poured concrete floor slabs, roof slabs or walls. The concrete inserts are specifically designed to provide hanger attachments for mechanical, electrical, plumbing (MEP) and fire protection. When the forms are stripped, the color-coded flange is visibly embedded in the concrete surface. The inserts allow the attachment of steel threaded rod or threaded bolts in sizes ranging from 1/4" to 3/4" in diameter. The sturdy base and rib design minimizes the chance of inserts accidentally being hit out of place after attachment to the forms. The impact plate offers resistance to rotation within the concrete as a steel threaded rod or threaded bolt is being turned during installation. A push-in thread version is also available which does not require turning the threaded rod or threaded bolt during installation which can be ideal for applications such as mounting prefabricated hardware and hanger assemblies.

Call for Pricing

P99-9510

Double™ Expansion Anchor

Base Material:
Concrete, Block, Brick, Stone
Size Range:
1/4" to 3/4"
Anchor Material:
Zamac Alloy
The Double is a dual expansion machine bolt anchor particularly suited for materials of questionable strength. It can be used in solid concrete and some block, brick and stone base materials.

Call for Pricing

P99-1051

Lag Shield

Base Material: Concrete and Mortar Joints of Block and Brick
Size Range: 1/4" to 3/4"
Anchor Material: Zamac Alloy
The Lag Shield is a screw style anchor designed for use with lag bolts. It is suitable for use in concrete and the mortar joints of block or brick walls. Lag Shield anchors are formed from Zamac alloy. In harder masonry materials, short style Lag Shields are used to reduce drilling time. The long style version is used in soft or weak masonry to better develop strength.

Call for Pricing

P99-9409

Scru-Lead™ Lead screw Anchor

Base Material:
Concrete, Block, Brick
Size Range:
No.6-8 x 3/4" to No.16-18 x 1 1/2"
Anchor Material:
Lead alloy
The Scru-Lead anchor is designed for use with sheet metal or wood screws in concrete, block or brick. The anchor is made entirely of lead alloy which is soft enough for easy installation, yet hard enough to give sure, secure holding power. The performance of this product depends on the integrity of the base material. The anchor is recommended for light duty applications where holding power is not a critical factor. It should not be used overhead.

Call for Pricing

P99-7559

Bantam Plug™

Base Material:
Concrete, Block, Brick, Wallboard
Size Range:
No.6-8 x 3/4" to No.14-16 x 1 1/2"
Anchor Material:
Plastic
The Bantam Plug anchor is a plastic anchor designed for use with lightweight fixtures with a sheet metal or wood screw. The anchor is recommended for light duty static applications where holding power is not a critical factor. It should not be used overhead.

Call for Pricing

P99-8934

Bantam Plug™ Kits - Slotted/Phillips Pan Head Sheet Metal Screws

Call for Pricing

P99-7580

Sharkie™ Plastic Wall Anchor

Base Material:
Concrete, Block, Brick & Wallboard
Size Range:
Use with #6 x 1” to #14 x 1 9/16” screw
Anchor Material:
Plastic
The Sharkie™ is a one piece plastic anchor designed for light duty applications. It works in hollow or solid base materials and is suitable for screws with various thread sizes and styles. Screws for the anchor may be installed with a screw gun. The top of the Sharkie™ is available with and without a flange at the top of the anchor to match the application.

Call for Pricing

P15-2000

Fischer S-Plug Nylon Anchors

Exceptional high tensile and impact strength, even at temperatures of -40oF to 212oF. Weather and age resistant, rust and rot proof. Sold in boxes of 100. Model S7.

Call for Pricing

P99-4060

Pop-Toggle™

Base Material: Gypsum Wallboard, Plaster, some Hollow Masonry
Size Range: Wall thickness from 1/8" to 3/4", No. 6 to No. 14 wood or
sheet metal screws
Anchor Material: Plastic
Pop-Toggle fasteners are hollow wall anchors ideal for static
applications requiring light to medium load performance. Installation
is very fast, needing a pre-drilled 5/16" diameter hole. The fastener
pre-installs without a screw, allowing for easy placement and removal
of the fixture. Pop-Toggle fasteners are not recommended for use
overhead or applications where holding values are critical.

Call for Pricing

P99-4052

SNAPTOGGLE™ Heavy-Duty Anchor

SNAPTOGGLE™ heavy-duty hallow-wall anchors carry twice the load in a small hole than standard anchors. New patented strap design with sturdier straps and smaller ratchet interval adjusts more precisely and snaps off flush to the surface.  Anchor is pre-assembled and ready to use.  Does not spin when bolt is installed with a screwgun.  SNAPTOGGLE Toggle Bolts can be used in all hollow materials, including:

  • Drywall
  • Gypsum Board
  • Plasterboard
  • Plaster
  • Concrete Block
  • Cinder Block
  • Aerated Concrete
  • Stucco
  • Composite Panels
  • Acoustic Ceilings
  • Fiberglass
  • Cement Board
  • Green Board

Call for Pricing

P99-2314

Wall-Dog™

Base Material: Wallboard (1/2”, 5/8” & double wallboard), Plywood, Concrete, Hollow or Grout Filled Block, Brick, Plaster
Size Range: 3/16” Diameter x 1 1/4”Length
Anchor Material: Case Hardened Steel
The Powers Wall-Dog™ is the industry’s first all steel one-piece screw anchor, which features high-profile threads for easy fastening into wallboard and other masonry base materials. Its deep cutting, corkscrew-like threads provide for smooth entry and a powerful hold, and when removed the Wall-Dog leaves a much smaller hole than toggles or other systems. For fastening into wallboard or wood, no predrilling is required. Fastening into concrete, hollow or grout filled block, brick and plaster requires a pre-drilled 3/16” ANSI hole.

Features and Benefits
• Installs in wallboard, plywood, concrete, hollow or grout filled block, brick and plaster
• Patented design provides for smooth entry, clean cutting and a powerful hold
• Thread design prevents spinning and stripping
• Heat treated point penetrates metal and wood studs
• Two finished heads, oval and pan
• Two colors, chrome & white head
• Self-drills own small hole in wallboard
• Installs quickly and easily with a Phillips® screwdriver

Call for Pricing

P99-2332

Wall-Dog Kits

Packaged with 50 Chrome Panhead Wall-dogs and 3/16” straight shank masonry bit.

Call for Pricing



Results 1 - 16 of 16