SPECIALTY LADDERS

Specialty Ladders



P14-1642

Fiberglass Manhole Ladder

Double side 3ft plastic rail protectors to avoid manhole rim damage, heavy duty gussets under steps and new heavy-duty 180° boots that allow you to work on either side of the ladder with thick non-marring thermoplastic elastomer tread bonded and mechanically fastened to the upper boot. The polypropylene copolymer upper boot provides strength, durability and fiberglass protection. This ladder is specially designed for use in manholes and meets or exceeds the safety standards set by ANSI, CSA, and OSHA.   375lb load capacity, ANSI Type IAA rated.  Rail depth: 3 1/4". Inside width: 12 1/8". Outside width: 14. 1/2".

Call for Pricing


P10-1947

LEANSAFE® X3 Dual Purpose Leaning Ladder

Professional 3-in-1 multi-purpose ladder that seamlessly changes from step to straight ladder in one adjustment.  Non-marring rubber top protects work surfaces. Compact rear rails fit between framing studs. Designed to lean up against walls, corners, studs and poles.  Single latch locks the rear rail to the front rail to keep the ladder in leaning mode. A two color design and highly visible LEANSAFE® logos to make this ladder easily distinguishable from a standard stepladder. 375 lbs. load capacity (includes user and tools).  This ladder meets or exceeds the safety standards set by ANSI and OSHA.

Call for Pricing


P14-2340

Louisville Ladder 1AA Fiberglass Cross Pinnacle Platform and Leaning Step Ladder (375 lb.)

Combining the sturdiness of a platform ladder with the ability to be leaned, this Platform to Leaning 2-in-1 Cross Pinnacle Ladder is a job site must-have. Its Hi-Vis green top and shoes make it easily identifiable to prevent fines and improve workplace safety. The V-shape Pro Top allows the ladder to lean against walls, buildings and poles, and onto and into corners. The top includes a magnet tray, hardware tray, drill and tool slots, and pipe or 2x4 holder, and two tool tether anchor attachment points to secure tools with a lanyard. Louisville Ladder’s SHOX system provides extra durability and resistance to abuse and accidental mishandling; it has a 375-Pound capacity and is non-conductive. It meets or exceeds the safety standards set by ANSI, CSA, and OSHA.

Call for Pricing


P14-8089

Werner Type IA Fiberglass Leaning Ladder

Werner Fiberglass Leaning Ladder has a duty rating of 300 lbs. LEANSAFE® ladder top secures tools and accessories, and is uniquely designed to securely lean against flat wall surfaces, wall corners, poles, and wall studs and perform as a standard stepladder. LEANSAFE® ladders have a lower rear rail to front rail connection point allowing the user to get closer to the work when in stepladder mode. Leaning a ladder safely requires that the rear rail is latched to the front rail. Werner’s patent pending single latch design stays engaged when needed, and is centrally located to easily open and close. Fiberglass rails are non-conductive for working near electricity.

Call for Pricing


P14-0745

Multi Purpose Ladder

This multi-purpose ladder is like having four ladders in one. Serving multiple uses for a variety of professional labor needs. 300lbs. Duty rating. Heavy duty locking pins. Quick activating snap-lock hinge. One person set-up. Provides stability and versatility for most demanding projects. Meets or exceeds OSHA and ANSI standards.

Call for Pricing


P10-1873

Type IA Fiberglass D-Rung Straight Ladder (300 lb.)

Fiberglass One-Section Straight Ladders have non-conductive side rails and a duty rating of 300lb. Easy to transport and maneuver. Durable and long lasting. The Traction-Tred® D-rungs are slip resistant. Durable rail shields and shoe brackets help to protect the rails from damage. The dual action feet pivot for use on hard or penetrable surfaces. Exclusive ALFLO® rung joint means TWIST-PROOF® performance.

Call for Pricing




Results 1 - 6 of 6