CORDLESS NAILERS



P89-2282

Milwaukee M18 FUEL 16 Gauge Angled Finish Nailer Kits

Milwaukee M18 FUEL™ 16 Gauge Angled Finish Nailer provides peak productivity at your jobsite, delivering unmatched nailing performance without the hassle of a compressor and hose. Leveraging our nitrogen air spring mechanism, the 16 Gauge Angled Finish Nailer allows you to consistently sink nails to your required depth in hard and soft woods while leaving clean nail holes, making for repeatable results and easy filling. This cordless finish nailer features a compact and ergonomic design providing access into tight spaces where nailing is required while limiting fatigue when using the tool. Kit includes: M18™ REDLITHIUM™ CP2.0 Battery, M18™ & M12™ multi-voltage charger, and contractor bag.

Call for Pricing


P11-6679

DeWalt 20V MAX* Cordless Cable Stapler Kit

DEWALT® 20V MAX* Cordless Cable Stapler is built for residential wiring applications, primarily fastening Romex® brand wires and cables. Made in the USA with global materials, this stapler has a proprietary cable guide that helps to drive staples over cable. The compact frame and lightweight design are ideal for tight spaces. A center-mounted LED light helps to eliminate shadows and illuminate the work area in low light conditions. Compatible with DEWALT DRS18100 1" insulated cable staples (sold separately). Includes: DCB203 20V MAX* 2.0 Ah battery, charger, soft kit bag, belt clip, and staple holder for staples.

Call for Pricing


P11-6677

Milwaukee M18 FUEL™ 30 Degree Framing Nailer Kit

M18 FUEL™ 30° Framing Nailer Kit sets the new standard for cordless framing nailers. By leveraging the nitrogen spring mechanism, POWERSTATE™ brushless motor, and REDLINK™ Intelligence, this nailer provides you with pneumatic performance and the convenience and freedom of cordless power. Delivering the power to sink full round head nails into dense engineered lumbers, this framing nailer allows you to tackle even the most demanding framing applications. To keep you productive and efficient throughout the day, the framing gun fires 3 nails per second with zero ramp-up time, meaning a nail is fired as soon as you pull the trigger. Additionally, the cordless framing nailer operates using only our REDLITHIUM™ Batteries and sealed compressed nitrogen to drive each nail, completely eliminating the cost of gas cartridges and maintenance associated with competitors’ nailers. Kit includes: M18™ REDLITHIUM™ XC5.0 battery pack, M18™ & M12™ Multi-Voltage Charger, a rafter hook, non-marring tip, and a contractor bag.

Call for Pricing


P89-2280

Milwaukee M18 FUEL™ 18 Gauge Brad Nailer Kit

Milwaukee M18 FUEL™ 18ga Brad Nailer Kit delivers peak productivity at your jobsite, providing you with unmatched nailing performance without the hassle of a compressor and hose. Leveraging our nitrogen air spring mechanism, the Brad nailer allows you to consistently sink nails to the proper depth in hard and soft woods while leaving clean nail holes matching the head of the nail.  Additionally, the cordless brad nailer operates using our REDLITHIUM™ Batteries and sealed compressed nitrogen to drive each nail, completely eliminating the cost of gas cartridges and maintenance associated with competitors’ nailers. The 18 gauge nailer is compact in size, and very lightweight, providing you with unmatched access into tight spaces and limiting your fatigue throughout your day. Kit includes: M18™ REDLITHIUM™ CP2.0 battery pack, an M18™ & M12™ Multi-Voltage Charger, a reversible belt hook, and a contractor bag.

Call for Pricing


P89-2268

Milwaukee M18 FUEL™ Cordless Finish Nailer Kits

The M18 FUEL™ cordless finish nailers provide unmatched driving power, speed and efficiency with practically no set up and minimal maintenance. Using the exceptional application speed, power and durability of Milwaukee’s compact POWERSTATE™ Brushless Motor, plus ready to fire cylinder design, these tools are capable of fully sinking 2 ½ ” nails into solid oak with zero ramp-up time. These 18-volt finish nailers operate from the revolutionary REDLITHIUM™ Battery for unbeatable strength and run-time, eliminating the mess and cost of gas cartridges. The M18 FUEL finish nailers not only prime you for top performance; it also creates the experience of a pneumatic nailer that professional carpenters and remodelers expect, without the hassle of compressors and hoses. Tool free jam release, dry-fire lock out, tool free depth of drive adjustment and non-marring nose pad are some of the great features these nailers encompass. Includes: M18 FUEL™ Finish Nailer, M18™ REDLITHIUM™ 2.0 Compact Battery Pack, M18™ & M12™ Multi-Voltage Charger, Belt Clip and Contractor Bag.

Call for Pricing


P89-2318

DeWalt 20V MAX XR 16 GA Angled Finish Nailer Kit

16 Gauge Angled Finish Nailer drives 16 Gauge angled finish nails from from 1-1/4" to 2-1/2" which makes it ideal for fastening crown molding, casing, and baseboards. With its brushless motor powered by a DEWALT 20V MAX Lithium-Ion battery the DCN660 is ready to go to work without the hassle of using gas, compressor, and hose. Tool-free selectable trigger for sequential or contact actuation modes.  Tool-free depth adjustment for precise countersinking of nails.  Also features tool-free jam release to quickly and easily clear nail jams.    Adjustable belt hook for left or right attachment depending on user preference. Inline magazine provides easy use in multiple orientations and in tight spaces.  Compatible with all DEWALT 20V MAX batteries.  Includes:  Angled Finish Nailer, 2.0Ah battery, charger and kit box.

Call for Pricing


P10-1438

DeWalt 20V MAX XR Lithium Ion Brushless Dual Speed Framing Nailer

Brushless motor and engine design provides enough power to drive 3-1/2” nails.  Sequential operating mode allows for precision placement and bump operating mode.  Dual speed optimizes motor speed for different nail lengths.  Trigger lock-off allows trigger to be disabled with tool not in use.  Includes: (1) 20V Max XR Premium Li-ion battery (4.0 ah), charger and no-mar tip.

Call for Pricing


P89-2319

DeWalt 20V MAX XR® 15 GA Cordless Angled Finish Nailer Kit

The DEWALT 15 Gauge Angled Finish Nailer drives 15 Gauge angled finish nails from 1-1/4" to 2-1/2" which makes it ideal for fastening crown molding, casing, baseboards, and hardwood floor installation. With its brushless motor powered by a DEWALT 20V MAX Lithium-Ion battery the DCN650 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. Includes: Angled Finish Nailer, 2.0Ah Battery, Charger and Kit Bag.

Call for Pricing


P89-2285

Metabo 36V MultiVolt™ Cordless Duplex Nailer

Metabo 36V MultiVolt™ 21° Cordless Duplex Nailer is here to revolutionize the concrete forming jobsite as it allows for a massive productivity boost vs. hand driving Duplex nails. Metabo HPT's unique Air Spring Drive System produces a similar feel to using a pneumatic nailer, combined with the power of the MultiVolt™ battery, this cordless Duplex nailer works all day long, driving up to 16D Duplex nails. Drive up to 900 16D 3-1/2" Duplex nails per charge with the included 2.5Ah MultiVolt battery. Includes: 36V MultiVolt™ 2.5Ah battery, 36V/18V charger, carrying bag, 3mm hex wrench, 4mm hex wrench, and safety glasses.

Call for Pricing




Results 1 - 9 of 9