DRYWALL PRODUCTS



P26-1033

Sikadur®-31 Hi-Mod Gel

Sikadur®-31 Hi-Mod Gel, is a 2-component, 100 % solids, solvent-free, moisture-tolerant, high-modulus, high strength, structural epoxy paste adhesive. It conforms to the current ASTM C-881, Types I and IV, Grade-3, Class-B/C and AASHTO M-235 specifications. Structural bonding of concrete, masonry, metals, wood, etc. to a maximum glue line of 1⁄8”. Two container set. Convenient easy mix ratio A:B = 1:1 by volume. A is 3 gallons and B is 1 gallon.

Call for Pricing


P15-7001

LevellinPRO™ Drywall Corner Trim

Forms outside / inside 90° and off-angle corners.  Durable – won’t crack or dent.  Tapered profile makes finishing fast and easy.  Permanently bonds corner to drywall; accepts any finish.  For faster installations, use with AutoPro Automated Drywall Corner System (Item 15-7000).  3.75” x 250’ rolls.

Call for Pricing


P15-7002

Hydrotrim® Outside 90

Hydrotrim outside 90° is ideal for use with all outside corners.  Also opens to a 135 degree corner or adjusts to any outside angle.  Hydrotrim is an easy-to-apply corner that does not blister, bubble, dent or crack.  Hydrotrim’s patent-pending design includes a water-activated adhesive and punch holes that allow joint compound to further bond the corner to the drywall.  Fast and easy to apply – simple spray with water, press on.  No screws, staples or messy adhesive spray needed.  Water-activated adhesive creates an indestructible bond to drywall; perforated holes allow joint compound to permanently seal corner to wall.

Call for Pricing


P26-0059

Sika Sikadur 32 Hi-Mod Epoxy Kit

Sika Sikadur 32 Hi-Mod is a multi-purpose, 2-component, 100% solids, moisture-tolerant structural epoxy adhesive. It conforms to the current ASTM C-881, Types I, II, and V, Grade-2, Class C and AASHTO M-235 specifications. Suitable for potable water contact, meets NSF/ANSI Standard 61. Excellent adhesion to concrete, masonry, metals, wood, and most structural materials. Paste consistency ideal for vertical and overhead repair of concrete. Fast-setting and strength-producing adhesive. Convenient easy mix ratio A:B = 1:1 by volume. A is 3 gallons and B is 1 gallon.

Call for Pricing


P15-7004

Levelline® Drywall Corner Trim

Levelline’s tapered profile design eliminates installation headaches and callbacks. Installing off-angles, inside and outside corners is faster and easier with LEVELLINE’s tapered flex design and new application box.  Corner flex goes straight from the box or roll onto the wall, and requires less mud to apply and finish. Superior corner trim construction (tapered plastic core, joint tape and formulated surface paper) ensures drywall corners will not split or dent. LEVELLINE’s can also withstand structural settling from green lumber and seismic movement without cracking of popping off the wall.

Call for Pricing


P15-7008

No-Coat® Double Barrel Hopper

No-Coat® double barrel hopper is set up for all angles, all the time.  Install off-angles, inside 90's, bullnose, and outside 90's in record time.  No time-consuming adjustments or extra hardware necessary.  Ensures a uniform and high-speed installation.  Single piece gates with ergonomic hand knob allow for fast and easy adjustments.  High-density polyurethane tank and gate controllers.  Stainless steel reservoir trough and gates.

 

Call for Pricing


P15-7009

Hydrotrim® Rollers

Ensure high speed, accurate installations.  Highly durable, squeezes out excess mud.  Taper matches exact corner profile for the maximum bon with the minimum amount of mud. Black rubber rollers.

Call for Pricing


P15-7017

No-Coat® Ultraflex® 325

Finishes short run off-angles of any length with straight, precise lines.  Built-in flexible hinge adjusts to fit any inside or outside corner angle.  Flange width hides irregular framing.  SLAM™ corner design ensures strength, durability, labor and material savings.

Call for Pricing


P15-7018

No-Coat® Flexible Corner 450

Extra stiff profile provides easy application for long spans.  Wide flange covers large gaps and poor framing.  Built-in flexible hinge adjusts to fit any inside or outside corner angle.  SLAM™ corner design ensures strength, durability, labor and material savings.

Call for Pricing




Results 1 - 9 of 9