POWDER ACTUATED TOOLS




P99-8994

DeWalt .27 Caliber Fully-Automatic Powder-Actuated

DeWalt .27 Caliber Fully-Automatic Powder-Actuated Tool is designed for structural use in commercial steel and concrete applications. The nailer drives both 8mm and .300” head fasteners and clips in lengths of 1/2” – 2-7/8”, as well as 1/4” threaded studs. It is powered by a standard .27 caliber (short) safety strip load. A power dial allows for adjustment within .27 caliber load colors. Tool-free disassembly allows for easy cleaning and maintenance. The DFD270 tool features automatic piston return and load indexing between fastenings, making it ideal for high-capacity commercial applications. The kit with the Accessory Magazine, the tool can also fasten collated pins. Kit includes tool, single shot nose piece, cleaning kit, spall guard, and kit box.

Call for Pricing


P95-2000

P3500™

Size Range:
1/2" to 3" pin lengths, .27 caliber

The P3500 is a low velocity, semi-automatic .27 caliber tool which can be used to install .300 head drive pins, 8mm head drive pins and 1/4"- 20 threaded studs, up to 3" in total length. The P3500 is designed for high speed and repetitive volume applications. Deluxe kit includes safety glasses, earplugs, cleaning brushes, lubricant, manual, PAT Warning poster and steel toolbox.

Call for Pricing


P95-2002

P35s™

Size Range:
1/2" to 1 1/2" pin lengths, .25 caliber

The P35s is specially designed for acoustical and drywall contractors. It is a low velocity, semi-automatic tool, which can be used to install .300 head drive pins, 8mm head drive pins and 1/4"-20 threaded studs up to 1 1/2" in total length. The P35s is designed for high speed and repetitive volume applications. The standard version of the tool is supplied with a flat end piston and a full size baseplate/guide. A limited access baseplate/guide assembly is also available. Deluxe kit includes safety glasses, earplugs, cleaning brushes, lubricant, manual, PAT Warning poster and steel toolbox.

Call for Pricing


P95-2019

PA3500™

Size Range:
1/2" to 3" pin lengths, .27 caliber

The PA3500™ is a modified version of the P3500 that includes a power adjuster, allowing the operator to effectively decrease the power level of the load being used. A red load can be toned down to the level of a green. Deluxe kit includes safety glasses, earplugs, cleaning brushes, lubricant, manual, PAT Warning poster and steel toolbox.

Call for Pricing


P95-2010

P3600™

Size Range:
1” to 3” 10mm Head Pins, 3/8” Threaded Studs, 3/8” Headed Pins, .27 caliber

The P3600™ is a powerful, heavy duty, low velocity, semi-automatic .27 caliber tool which can be used to install 10mm head drive pins, 3/8” threaded studs, and 3/8” headed drive pins. The P3600™ is designed for applications where more power is needed, such as attaching 2 x 4s to hard aggregate or steel. The tool utilizes a red or purple .27 caliber strip load. Deluxe kit includes safety glasses, earplugs, cleaning brushes, lubricant, manual, PAT Warning poster and steel toolbox.

Call for Pricing




Results 1 - 5 of 5