CORE DRILL ACCESSORIES



P10-1178


P10-9787

Control Panel-Dual Switch

The Control Panel contains the machine’s on/off switch, along with an amp meter which lets the operator know exactly the correct speed/pressure to operate the core rig at. Proper use of the amp meter increases productivity and maximizes core bit life. This Dual Switch model Control Panel has a separate on/off switch for the vacuum pump and the drill motor. This feature allows you to anchor the rig by setting the vacuum first, then operating the drill motor. The amp meter has three red lines; for use with 15 amp, 18 amp and 20 amp motors. Comes with 30 amp plug end.

Call for Pricing


P10-9788

Control Panel-Single Switch

The Control Panel contains the machine’s on/off switch, along with an amp meter which lets the operator know exactly the correct speed/pressure to operate the core rig at. Proper use of the amp meter increases productivity and maximizes core bit life. It has a single on/off switch that controls both the vacuum pump and drill motor at the same time. The amp meter has three red lines; for use with 15 amp, 18 amp and 20 amp motors. Comes with 20 amp plug end.

 

 

Call for Pricing


P10-9786

Vacuum Pumps

These Vacuum Pumps mount easily and run quietly. Designed specifically for use with our rigs. Manufactured by Gast, they are 1/8 HP and include fittings. Please check the model of your core rig stand in order to select the correct Vacuum Pump.

Call for Pricing


P10-9783

Spacer Blocks

When mounted to the drill stand, Spacer Blocks allow the motor to be set further away to allow for drilling larger capacity holes. Each 2" Spacer Block adds 4" of drilling capacity. Please check the model of your core rig stand in order to select the correct Spacer Block.

Call for Pricing


P11-9020

3-gallon Industrial Water Tank Sprayer

3 1/2 gallon heavy-duty, impact resistant poly water tank. For use where a regular tap supply is not available. Hose not included.

Call for Pricing


P11-9032

Water Hose

Heavy duty with standard brass male and female water hose fittings. 5/8" I.D. by 8' long.

Call for Pricing


P14-9050

Diamond Core Bit Reducer

This adapter has a 5/8"-11 male on one end and a 1 1/4"-7 female thread on the other for drilling with core bits that have diameters of 1 1/2" or less.

Call for Pricing


P90-3014

Diamond Core Bit Adapters

Call for Pricing


P90-3002

Diamond Core Bit Extensions

An easy way to extend core bit length is by using core bit extensions. Extensions can be combined to achieve any desired length.

Call for Pricing


P90-3005

Diamond Core Bit Adapters for Competitive Core Rigs

If you already own a Hilti™ or a Jack Moore Bantam™ style core rig, the following adapter will enable you to use standard core bits without having to use their proprietary core bits.

Call for Pricing


P90-3001

Diamond Core Bit Adapters for Competitive Core Rigs

If you already own a Hilti™ or a Jack Moore Bantam™ style core rig, the following adapter will enable you to use standard core bits without having to use their proprietary core bits.

Call for Pricing


P25-0232

BitBuddie™ Dustless Bit Shroud

Flexible translucent rubber dust shroud with 2 sizes for a variety of applications.  Suction hold it in place requiring no clamps.  Captures dust and slurry.

Call for Pricing




Results 1 - 13 of 13