REBAR CUTTERS



P11-7245

Metabo 36V MultiVolt™ Brushless Rebar Bender/Cutter

Metabo HPT 36V MultiVolt™ Portable Rebar Bender/Cutter is the industry's first cordless rebar bender/cutter. This tool can be used cordless or corded when paired with the (11-7246) AC Adapter (sold separately). Cuts approximately 270 pieces of #5 rebar per charge and bends approximately 520 pieces of #5 rebar at 90°per charge with MultiVolt 4.0Ah battery. Brushless technology offers more run-time, increased power, and extended durability with essentially no maintenance. Convenient color-coded angle adjust dial allows users to set accurate bend angle up to 180° for up to #5 rebar. Includes: (2) 36V MultiVolt™ 4.0Ah batteries and rapid charger with USB port.

Call for Pricing


P10-0165

Multiquip Rebar Cutter - Hand Held

Easily move around any job site.  Maintains a safe working environment by preventing rebar fragments from flying out with ther rebar protective cover.  Easily cut different diameters of rebar by adjusting the space between the blades with the spacing bolt and nut.  Cuts up to #8 rebar (1").  115V 60Hz electric motor, 13 amps.  Maximum Cutting Speed: 3.5 seconds.  Weight: 48.5 lbs. Includes: Hex wrenches, hydraulic oil and carry box.

Call for Pricing


P10-0339

TWINTIER® Rebar Tying Tool

The TWINTIER®  is the fastest solution for tying #5 x #5 to #9 x #10 rebar combinations, making it the largest capacity rebar tying tool on the market. TWINTIER® technology allows the RB611T to tie 5,000 ties per charge, while delivering just the right amount of wire for greater productivity and cost savings. Compared to hand tying this tool can reduce the risk of musculoskeletal injuries.  Model: RB611T.

 

 

Call for Pricing


P10-0322

Cutting Edge Saw™

Compact and lightweight tool has a 3-position removable side handle and a rotating trigger handle that provides the operator with multiple cutting positions and increased maneuverability in tight areas.  Cut a variety of materials including rebar, all-thread rod, coil rod, EMT conduit, pipe, tubing, burglar bars and more. It is designed to cleanly cut the material FLUSH with the surface.  Model: BNCE-20.

Call for Pricing


P10-0164

Multiquip Rebar Bender - Portable

Compact design for use on jobsite or shop.  User-friendly design features push-button start and stop.  Maximum bending capacity #8 rebar (1”).  Maximum Bending speed is approximately 5 seconds for 180° angle.  A foot switch is included for high production bending.  115V 60Hz electric motor, and the motor runs only during bending operation for lower noise level and energy efficiency. Includes:  Foot switch, rollers (5 sizes), collars (6 sizes), tool kit and waterproof cover.

 

Call for Pricing


P10-0221

Rebar Tying Tool

Five times faster than manual tying. Makes ties in less than one second per tie with consistent tie strength. Thanks to the Lithium-lon battery technology, the RB398 ties approximately 3,500 ties per charge. Weighs only 5 lbs. and is easy to handle. Ergonomic design built for easy maneuvering and one-handed operation. Brushless twisting motor promotes energy efficiency and longer lasting life for the tool versus a brushed motor. MAX recommends daily blow out of tool with compressed air and has added blow out channels to ease cleaning. Model: RB398.

Call for Pricing


P10-0335

Rebar Twin Tying Rebar Tool

Double the speed with TwinTier's with Dual Wire Feeding Mechanism (patent pending) increases productivity.  "Wire Pull-Back Mechanism" dispenses the precise amount of wire needed to form a tie, reducing wire usage. "Wire Bending Mechanism (patent pending)" produces a shorter tie height. Less concrete is needed to fully cover a wire tie.  Tie between #3x#3 and #7X#7 rebar.  Model: RB441T.

Call for Pricing




Results 1 - 7 of 7