HANGERS, CLAMPS & PIPE ATTACHMENTS



P21-0410

Swivel Loop Hanger

Often referred to as an “EM-Lok” hanger. Manufactured to use minimum rod sizes permitted by the NFPA for fire sprinkler piping. Electro-galvanized. Made of pre-galvanized carbon steel with zinc electroplate insert nut. FM approved and UL listed. Available in an electro-galvanized or copper plated finish.

Call for Pricing


P21-0440

Clevis Hanger Standard

Recommended for the support of stationary, non-insulated pipe lines. FM approved for 2 1/2" through 8" pipe. UL listed for 2 1/2" through 8" only.

Call for Pricing


P21-0490

Heavy Duty U-Bolt

Pipe support for general piping applications. Electro-Galvanized or Stainless Steel.

Call for Pricing


P21-0560

Riser Clamp

Designed for supporting vertical steel risers, utilizing the structure to support the legs on each end of the clamp. Normally rests on the floor through which the riser passes. Designed to hold utilizing clamping action alone with no more than 10' of water filled steel pipe. (Welded lugs must be used on pipe above clamp for greater loads.)

Call for Pricing


P21-0543

Split Ring Hanger

Designed for suspending non-insulated stationary pipe lines. Can be used in conjunction with a Steel Wall Plate to allow for runs close to ceilings or walls.

Call for Pricing




Results 1 - 5 of 5