DUST EXTRACTORS FOR ELECTRIC TOOLS

All Dust Extractors are designed for continuous, heavy duty usage. They can be used wet or dry. Features include automatic on/off system (vacuum operates only when tool is on). These vacuums operate very quietly (58 decibels). HEPA filters are available.



P25-0298

Fein Turbo II Vacuum

Powerful wet and dry vacuum cleaner for connecting power with high performance turbine for 151 cfm flow rate and 98.4" of water lift.  Low volume of 66 dB (A).  Large range due to 19 ft power cord and 13 ft vacuum hose.  Large wheels rotate 360° for optimal maneuverability, even in tight conditions.  Tool coupling with suction control for easy control of suction power; autostart outlet with power-on delay to prevent current spikes.  Practical storage area with rim.  Weight: 20.1 lbs. Includes:  suction hose 13’x 1-3/8” dia., tool coupling with suction control, filter, and filter bag.

 

 

Call for Pricing


P10-5547

Fein Turbo II Accessories

Call for Pricing


P25-0220

Dustless HEPA Wet/Dry Vacuum

Full Unit Certified HEPA vacuum system meets EPA requirement for lead-safe certification.  Powerful 11.5 amp motor offers lasting performance and strong suction. Wunderbag™ Micro-filter extends the life of the HEPA filter. Ability to change from dry to wet vacuuming without stopping to change filters.  Interior baffle/wall keeps the HEPA filter dry at all times. Made in the USA.  Includes:  (1) 16 gallon canister, (2) extension wands, (1)  crevice tool, (1) floor tool, (1) 1.5" x 12' hose, (1) WunderBag micro pre-filter, (1) certified HEPA filter, and (1) Hepa filter cover.

Call for Pricing


P25-0221

Dustless WunderBag™ Micro Pre-Filter

One of the big advantages of the Dustless HEPA Wet/Dry Vacuum is the optional Wunderbag™ Micro Pre-filter that greatly extends the life of the HEPA filter. The Wunderbag™ is an inexpensive disposable filter that captures the vast majority of the dirt and dust before it reaches the more expensive HEPA filter. In fact, the Wunderbag™ captures particles down to .5 micron; remarkably close to the HEPA filter that captures particles down to .3 micron.

The Wunderbag™ is capable of holding MORE than 40 LB of fine dust, but the vacuum is designed to be emptied at 40 lbs. so that at least half of the filter bag's surface area is always free to support the high airflow rates required for effective dust control. The Wunderbag™ should be replaced whenever the vacuum collects 40 lbs. of dust, or when it appears to be half full. It should be replaced after being used for Wet vacuuming so the interior of the vacuum does not become moldy. Wunderbag™ retains its strength when wet.

Call for Pricing


P25-0223

Dustie® Dust Collection Shroud for Hand Grinders

Fast and easy to install with Flex-Flange™ (included).  Fits most hand grinders, and offers adjustable height for different grinding/sanding wheels. Captures 99% of airborne dust.  Designed to capture extra fine dust from grinding, sanding, and cutting concrete, masonry, fiberglass and other materials.   Protects workers from harmful Silicosis and Hexavalent Chromium.  Meets EPA regulations for lead paint renovation work.

The Dustless Technologies Dustie meets OSHA guidelines and improves worker health and safety. Designed to be used with the Dustless Wet Dry Vacuum for effective dust control, the Dustie keeps particles from escaping, and the vacuum keeps dust contained. Simply attach the vacuum hose to the Dustie, and you won't have to worry about leaving a film or cleaning up messes. The Dustie's innovative design keeps your work environment clean and safe.  If you use your grinder for tuck pointing, crack chasing, or decorative concrete cutting, you will want to use the optional cover plate. Trim a section off the front edge of the Dustie and snap the cover plate into place. You can choose two different operation angles from the molded cut lines in the Dustie.  Includes:  (1) shroud, (1) Flex-Flange™ banding clamp, (3) washers, and (1) releasable zip tie.

Call for Pricing


P25-0228

DustBuddie® Dust Control Shroud for Hand Grinders

Easy to install.  Comes in two sizes: 5" fits 4" to 5" grinders, and 7" fits 6" to 9" grinders. Captures up to 99% of airbourne dust.  Clear polycarbonate offers improved visibility.  Removable front lip for grinding against a wall.  3 spacers and adjustable height setting to accommodate different wheels and discs.  Brush skirt provides support for a smooth, cushioned grinding action.  Meets EPA RRP guidelines for lead paint when attached to a certified HEPA vacuum.  Includes:  (1) clear polycarbonate shroud, (1) 18" flexible hose, (3) height adjustment spacers, and (1) releasable zip tie.

Call for Pricing


P25-0230

CutBuddie™ for Dust Collection

For dust collection when mortar raking/ tuck pointing, crack chasing and decorative concrete cutting with a hand grinder.  Captures up to 99% of airborne dust. Clear polycarbonate for improved visibility.  Easy to install, and comes ready to use.  Integrated universal adapter. The cutting depth guide is easy to adjust and is essential when performing high quality work where consistent quality counts. Features swivel hose adaptor for easy handling.  Meets government guidelines (OSHA, NIOSH, and EPA RRP).  Includes:  (1) clear polycarbonate shroud, (1) 18" flexible hose, (3) space spacers for blade centering, (1) arbor extender, and (1) releasable zip tie.

Call for Pricing


P25-0232

BitBuddie™ Dustless Bit Shroud

Flexible translucent rubber dust shroud with 2 sizes for a variety of applications.  Suction hold it in place requiring no clamps.  Captures dust and slurry.

Call for Pricing




Results 1 - 8 of 8