STEP LADDERS

Step Ladders



P14-2121

Werner Fiberglass Step Ladder- Type 1A - 300 lbs.

Type 1A Fiberglass ladder with a duty rating of 300lb, it features a HolsterTop® with the Lock-In System to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy duty internal spreaders. All steps are knee braced and the foot pads are riveted to the EDGE® structure. The EDGE bracing system helps protect the rail from damage. Each Traction-Tred® step is slip resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.

Call for Pricing


P14-1600

Fiberglass Step Ladder - Type 1A - 300 lb.

Type 1A, 300 lb. rated industrial step ladder, excellent for jobsite use. Inside spreader braces help protect braces from getting hooked or abused in transit. Durable molded top with slots to help keep tools close at hand. Vertically mounted U-shaped back braces are spaced at one foot intervals for maximum stiffness. Steps are double riveted with steel rivets for maximum shear strength. Slip resistant rubber feet. Meets all OSHA requirements and the ANSI A14.5 standard.

Call for Pricing


P14-1700

Fiberglass Step Ladder- Type 1AA - 375 lbs.

Meets ANSI Type IAA 375 lb. standard. Strong molded boot helps to protect the fiberglass rail and the thick rubber tread provides a secure, slip resistant footing. Inside spreader braces help keep braces from getting hooked or abused during transit. Each step features heavy duty gussets secured with large steel rivets. The bottom step has two pairs of steel gussets for even more strength. Wide back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Rugged, non-conductive structural molded top. Shox step supports offer enhanced impact absorption and better protection against damage.

Call for Pricing


P14-1620

Twin Front Fiberglass Step Ladder Type 1A (300 lb)

“Twin-Front” design allows entry to ladder from either side allowing the ladder to be used simultaneously by one person per side. (Total combined weight on ladder must not exceed 600 pounds; 300 lbs. per side.) Features inside spreader braces which help protect braces from damage in transit. Heavy gauge steel hinge design at top of ladder. Slip resistant rubber feet. SHOX step supports offer enhanced impact absorption and better protection against damage.Meets all OSHA requirements and the ANSI A14.5 standard. Type 1A.

* Type 1AA rated (375 lbs)

Call for Pricing


P14-1638

Fiberglass Pro Platform Ladder

An 8 foot non-conductive fiberglass platform ladder capable of holding a load capacity of 300lbs. Featuring an extended handrail, 30% larger platform area for added comfort and safety plus a ProTop with multiple tool slots and magnet. Also equipped with SHOX impact system and non-marring bonded treads.

Call for Pricing


P10-1880

Fiberglass Platform Ladder Type IA (300 lb.)

Fiberglass  Platform Ladder has a duty rating of 300lb and features a safety guardrail to encourage proper use. Back-up plates reinforce all top connectors and the large platform provides a secure and comfortable work area. The slip-resistant Traction-Tred® steps are double riveted and knee braced. A full set of rear horizontals are spaced one foot apart. The EDGE® molded brace and footpad combination provides bracing strength and increased protection from damage. Fiberglass rails are non-conductive for working near electricity.

Call for Pricing


P14-2150

Werner Type IA Fiberglass Podium Ladder (300 lb.)

Podium Ladder is ideal for working at fixed heights and is easier to maneuver than scaffolds or lifts. The extra-large platform with toe guard feels like you are standing on the ground and 4X Work Zone allows you to work facing any direction. This ladder features full aluminum bracing and a full set of rear horizontals. The LOCKTOP™ extended guardrail provides an extra point of contact and conveniently organizes tools and accessories. The newly designed EDGE360™ gives the bottom of the ladder protection from every angle with integrated rail shield, EDGE bracing and over-sized foot pads.

Call for Pricing


P14-2156

Werner Podium Gate

Fully surrounds the user and helps keep user inside the ladder footprint.  Work facing any direction. Neatly collapses for easy access and storage

Call for Pricing


P14-1598

Fiberglass Tripod Ladder (300 lb)

Tripod fiberglass ladder offers more stability than a four-legged ladder and has the ability to get into tighter spaces. This ladder features the Raptor Top with all the tool slots you need and the Raptor boot on all three shoes. It has a center-pull spreader brace and heavy duty reinforcements. This model is up to 15% lighter with an increased step surface then the previous model. 300 lb. load capacity (includes user and tools). This ladder meets or exceeds standards set by ANSI and OSHA.

Call for Pricing


P10-1865

Fiberglass Step Ladder - Type 1 (375 lb.)

Fiberglass Step Ladder has a duty rating of 375lb and features heavy duty aluminum HolsterTop®. With a full set of horizontals and heavy-duty internal spreaders, these ladders are built for the long haul. The molded external rail shields and the EDGE® bracing system help decrease damage to the rails. The slip-resistant Traction-Tred® steps are single riveted and have extra wide knee braces.  Fiberglass rails are non-conductive for working near electricity.  Meets or exceeds the safety standards set by ANSI and OSHA.

Call for Pricing


P14-2023

Cross Step Ladder

Cross Step Ladder is a 2-in-1 ladder that converts from a Step Ladder into a Shelf Ladder for a 2 in 1 combination. V-Shape ProTop allows the ladder to lean against walls, buildings and poles. ProTop with magnet and multiple tool slots. Innovative Lock Latch to secure rear section. Raptor boot protects fiberglass and has non-marring heavy duty bonded tread.  Shox – superior impact absorption, protects fiberglass and step. Double rivet and flared construction for rigidity and stability. Type 1A; 300 lb load capacity

Call for Pricing


P10-1879

Werner Duty Rating Replacement Label

Werner duty rating replacement label 300 lbs ladder.  Sold individually.

Call for Pricing




Results 1 - 12 of 12