HOISTS



P16-0417

Harrington Chain Hoists

Harrington's CF hoist exemplifies simplicity in design while making zero compromises on performance. Outstanding durability is due to a die-cast aluminum body and high-strength, heat-treated main pinion shaft and load gear. Pre-lubricated ball bearings, precision machined gears, and Weston-style load brake make lifting smooth and easy while allowing long service and low maintenance.

Call for Pricing


P16-0255

Lever Hoists

JET® JLP-A Series lever hoists combine safety, reliability, and durability that are designed to perform in light to medium-duty industrial applications. The patented Brake Wear Indicator increases safety by letting you know when to replace the friction disks. JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load. The Weston style double ratchet pawl brake design splits the load to opposite sides of the ratchet gear for greater load security and increased safety. Industrial rated alloy steel hooks rotate 360° for easy rigging and slowly stretch to indicate an overload situation. Redesigned ergonomic grip allows for greater operator control and increased comfort. Secured with Allen screws and lock nuts, the cast-steel safety latches are more durable than stamped steel latches and will not bend out of compliance with lifting regulations. Grade 80 black oxide coated load chain for added durability. Needle bearings support the load sheave to increase efficiency and promote smooth operation. Impact resistant all steel construction for added durability and protection. This product complies with ANSI / ASME B30.21 and HST-3 Standards.

Call for Pricing


P16-0220

Hand Chain Hoist

The light weight, compact design is an ideal choice for low head room applications. Feature a powder coated finish to protect against rust and corrosion, and the patented fused break discs are designed for low maintenance. The 360° swivel and cast safety latch design of the drop forged hooks are built for easy rigging, making it ideal for construction, and industrial applications. Slip clutch style overload protection that prevents lifting or pulling damaging loads beyond the rated capacity of the hoist and when triggered, the overload protection can be reset on site. Drive pinion supported on both ends with sealed ball bearings.  Complies with OSHA, ANSI/ASME B30.16 and HSt-2 standards.

 

Call for Pricing


P16-0401

Harrington Lever Hoists

Harrington lever hoists are industry recognized and proven to perform in the most extreme and demanding applications. With a focus on quality, all of our lever hoists are designed to be high-performing, extremely durable and are built to accomplish the toughest tasks.

Call for Pricing


P16-0162

Steel Lever Hoist

The patented, advanced offset handle design allows for extra clearance between the operator's hand and the load chain. Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation. Durability Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain. Secured with Allen screws and lock nuts, the cast-steel safety latches are more durable than stamped steel latches and will not bend out of compliance with lifting regulations. Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist. The lightweight design with shorter handle and smaller body are ideal for confined areas and low headroom applications

Call for Pricing


P16-0223

Cable Hoist

General purpose cable puller designed to lift, lower, stretch or pull heavy loads 1-Ton to 4-Ton capacities. Lightweight zinc plated steel construction to resist corrosion. Double solid cast aluminum ratchet wheel brake system holds load securely in any position. Concealed spring lever control prevents accidential release. Drop forged hooks with safety latches are standard. Aircraft quality 3/16" cable. Snatch block included with 2-ton and 4-ton models. Complies with ANSI/ASME B30.21 standards. Load tested to 125% of capacity with certificate.

Call for Pricing


P16-0238

Beam Clamp

Durability Welded all-steel frame and powder coat finish provide maximum durability and protection. Clamp jaw is designed to distribute the load away from the beam flange edge increasing safety. Used for quick mounting of a hoist on a broad range of beams up to 8-2/3 inches wide for increased versatility. Complies with ANSI / ASME B30.17 and B30.20 standards. Load tested to 125% of capacity with certificate

Call for Pricing


P16-0013

My-Te® Electric Winch Hoist (2,000 lb. Capacity)

This portable electric hoist is excellent for long lift applications. Up to 1,000 lb. lifting capacity. Powered by a 1.25  HP motor that plugs into any 115 Volt, AC grounded outlet. The motor has worm gear that holds the load in position when stopped. The high capacity cable drum holds a one of any four diameters of steel cable: 1/8'' (up to 1,000'), 3/16'' (up to 450'), 1/4'' (up to 250') and 5/16''' (up to 150'). Heavy duty angle base is drilled for six 1/2'' bolts (9/16'' diameter holes) for mounting. Weight: 76 lbs.

Call for Pricing


P16-0012

My-Te® Max Electric Winch Hoist

This heavy duty portable electric hoist offers powerful handling or diverse lifting and pulling tasks. Used for lifting heavy apparatus and motors. Ideal for in-plant use or installation of elevator equipment. Unit has positive load holding, cable tensioner for the better tracking and dynamic braking for instant stopping. Powered by a 1.25 HP motor that plugs into any 115V, AC grounded outlet. Unit is wired with a low voltage 10 foot pendant control and has a lifting capacity of up to 6000lbs. Cable drum storage holds up to 250 ft. (1/4''), 160 ft (5/16''), and 110 ft. (3/8'') Heavy duty base drilled for six 9/16'' mounting holes for 1/2' diameter bolts. Weight 127 lbs.


Call for Pricing


P16-0008

Lug-All Replacement Handle

Call for Pricing


P16-0130

Gin Wheel Or Roofer’s Block

Heavy duty 12" Gin wheel, also known as roofer's block or hoisting block.  Swivel latch with hook. Ideal for hoisting roofing materials and tar on top of buildings. Model GW12

 

Call for Pricing


P16-0148

Single Manila Rope Wood Blocks

Mortise wood blocks for manila rope have all drop forged fittings. Single iron sheave. All metal parts are galvanized. Round loose hook with safety latch.

Call for Pricing


P16-0152

Double Manila Rope Wood Blocks

Mortise wood blocks for manila rope have all drop forged fittings. Double iron sheaves. All metal parts are galvanized. Round loose hook with safety latch.

Call for Pricing


P16-0005

Haven’s™ Grips

Also known as a "Wire Grips" or “Chicago™ Grip,” this wire pulling grip is an ideal tool used to grip the cable so it can be pulled, tugged, stretched or dragged. Designed for use when a light, compact grip is desired and where conductor damage is not a factor. Pulls wire and cable tight with a come along (ratchet puller). Gripping pressure of the knurled jaw is applied to 1/4" cable area. Item 16-0007 has a swing latch to help hold cable in the jaw.

Call for Pricing


P16-0143

Ratchet Binder

These turnbuckle type load binders offer the advantage of a continuous take-up feature and infinite adjustment that gets the last half link of chain. The pushpull ratchet action and double-acting, spring-loaded pawl permit easy one-man operation without kickbacks. Pinpoint setting for tension. Permanently locked at all times. All steel rigid construction. Supplied with grab hooks at each end.

Call for Pricing




Results 1 - 15 of 15