ABRASIVE GRINDING & CUTTING WHEELS



P10-2503

Grinding Wheels for Angle Grinders

These high quality grinding wheels are excellent for a wide range of grinding applications. Type 27 depressed center. Metal wheels are designed for use on ferrous metals such as iron, steel, welds, etc.

 

 

Our grinding, cut-off, and cup grinding wheels are tested to meet the rigorous grinding and cutting requirements of professional users. The result is high quality, high performance products that minimize working time, and maximize performance and operator safety.

Type 27 Depressed Center Grinding Wheels

Call for Pricing


P10-4009

Cut off Adapters

To adapt high speed cut off wheels to die grinder. Note: Item 10-4011 has a flush, flat top.

Call for Pricing


P10-2527

Cutting Wheels for Angle Grinders Type 27

Designed for fast cutting and long life, these high quality grinding wheels are excellent for a wide range of cutting applications. Type 27 depressed center metal wheels are designed for use on ferrous metals such as iron, steel, welds, etc.

Call for Pricing


P10-4006

“Slicer” Cutting Wheels For Grinders

These ultra-thin slicer wheels cut faster than any abrasive wheel on the market. Reinforced for safety, tough for a good wheel life. Excellent for cutting threaded rod, bolts and rebar. Designed for use with 4 1/2", 5", and 6" angle grinders, and straight die grinders.

Call for Pricing


P12-1870

DIAMOND EDGE CUT-OFF BLADES

Using an innovative new process, diamond crystal is permanently brazed to the blade and remains fixed for continuous cutting throughout the life of the wheel.   Solid steel body maintains wheel diameter throughout its life and greatly reduces the danger of breakage.  Thin kerf design cuts faster and produces less dust and debris than traditional abrasive wheels.

Call for Pricing


P10-2529

Cutting Wheels for Circular Saws

Designed to be used with handheld electric 7 1/4" or 8 1/4" saws.

Call for Pricing


P10-3000

Cutting Wheels for High Speed Saws

High quality abrasive blades specifically designed for use with our Cutoff Saws. Type 1 A24R Metal blades are used on all ferrous metals including steel, angle iron, and rebar. Ductile blades are for ductile pipes, water mains and can also be used for cutting cast iron, hard metals, and any cutting of combination metal/concrete. Concrete blades are for use on soft aggregate stone, brick, masonry, and concrete.  Wheel thickness 1/8".  Max RPM for 12":  6,300.  Max RPM for 14":  5,400.  10 blades per box.

Works well with 10-2704

Call for Pricing


P10-3024

Cutting Wheels for Chop Saws

Fast cutting, long lasting abrasive blades designed specifically for Chop Saw machines. Drywall Stud blades are used for cutting metal studding, thin rebar, and light gauge metals. Steel blades are for use on structural metals including angle iron, channel iron, strut, heavy rebar, and other ferrous metals.

Wheels work with:
Item 10-3021 Item 10-2658

Call for Pricing


P15-0682

Metal Fast Cutting Chop Saw Wheels Type 1

With a softer formulation for expedited cutting, DEWALT Type 1 Metal Fast Cutting Chop Saw Wheels feature high grain concentration for aggressive cuts and smooth-running wheels. 2 full sheets of fiberglass offer durability and safety.

Call for Pricing


P19-1427

Lenox MetalMax™

MetalMax delivers 1,000 or more cuts with no need for wheel changes. That is 30 times longer life than thin bonded cut-off wheels.*  Advanced diamond technology provides extreme durability in metal cutting applications, leading to increased productivity, reduced downtime, and a lower cost per cut compared to thin bonded cut-off wheels. With LENOX MetalMax there is less odor and dust residue, as the wheel does not wear down like bonded abrasives. Sparks originate only from the material being cut.  MetalMax is recommended for multiple types of metal including steel, sheet metal, stainless steel, rebar, cast iron, aluminum**and non-ferrous metals.

Call for Pricing


P10-2536

Cup Wheels

Type 11 Cup Wheels with steel back for use with 7" & 9" large angle grinders. Made of Aluminum Oxide (A16Q) for Steel applications or Silicon carbide (C16N) for masonry applications. High stock removal. Good wheel life. Excellent for cleaning castings, mold marks, and removing flashing from concrete or steel.

Call for Pricing


P19-1300

Zec® Concrete Grinding Discs

Inexpensive, lightweight and very aggressive — these abrasive discs will grind down imperfections in precast and prestressed concrete in a fast and efficient manner. They are also excellent for cleaning epoxy off of any masonry surface. Because of the spiral design and air holes, the disc runs cooler which prevents loading and increases production. Discs can be used flat for maximum surface coverage. The plastic reinforced backing eliminates the need for a backing pad.

Other grits available. Ask your Colony Representative for a complete listing.

Call for Pricing




Results 1 - 12 of 12