METAL STUD FASTENING APPLICATIONS



P21-0750

Caddy Box Mounting Bracket

Easily attaches 4" and 4 11/16" outlet boxes to metal or wood stud. Support leg prevents box movement and provides far side support. Offset design eliminates unsightly drywall bulge. Alignment notch simplifies consistent box positioning.

Call for Pricing


P12-0182

Saf-Te-Plate

Protects cable and plastic pipe from nail punctures. Single hammer blow attaches the plate to wood studs. Required for compliance with NEC 1990 Article 300-4A.

Call for Pricing


P21-0738

Low Voltage Mounting Bracket

Provides a fast, easy way to install low voltage Class 2 communication outlets during rough-in construction without having to use an electrical box. Makes fish wiring easier. A bendable flap provides a termination plate for conduit. Automatically positions for 1/2" or 5/8" drywall. May be installed to the front or the side of a metal or wood stud. Eliminates bulges in the drywall caused by plaster rings. Fastens with dry wall or self tapping screws.

Call for Pricing


P21-0727

Caddy Conduit Clamps With Bolts

Fast and easy installation- installs with screwdriver or nut driver. Has mounting hole for 1/4" bolt. Retained bolt and nut means there are less parts to handle or drop. Bright zinc finish.

Other sizes available. Call for a complete listing.

Call for Pricing


P21-0746

Caddy “Colorado Jim” Cable Support

A fast, economical way to comply with NEC 1990 Article 300-4d when used with metal and wood stud. Can be used to support up to 6 runs of nonmetallic sheathed cable, or up to 4 runs of nonmetallic sheathed cable. Fastens to metal stud with self drilling or tapping screws.

Call for Pricing


P21-2043

Caddy Box Mounting Brackets

Supports electrical boxes, plaster rings or low voltage devices from one bracket. Accommodates up to four 4" or 4 11/16" boxes. Mounts 1 1/2" or 2 1/8" deep boxes. Eliminates the need for electrical boxes on low voltage applications. Bendable leg serves as a bracket stabilizer. Bendable tab has a 3/4" conduit stubbing hole.

Call for Pricing


P21-0762

Caddy Screw Gun Box Bracket

Designed so the electrical box can be mounted between studs. Attaches with self tapping screws and is aligned with the V-Groove so the box is straight. Movement is eliminated when used with flexible conduit, ENT, AC/MC or ROMEX®. Allows for multiple box mounting. Packaged 50 per box.

Call for Pricing




Results 1 - 7 of 7