PRESSURE WASHERS

Pressure Washer Accessories


P11-2723

Work Pro® Series Gasoline Direct Drive Pressure Washers

Designed with a powder coated steel frame and 10” flat-free tires, the Work Pro Series is portable and easy to move form one job to the next. Pump is equipped with the Mi-T-M Pressure Relief Start, brass manifold, thermal relief valve, in-line water strainer, and built-in low pressure detergent injector. Unit Includes: quick connect nozzles: - 15º, 25º and detergent nozzle, 25’ x 3/8” wire-braided hose, and 36” lance with trigger gun.

Call for Pricing


P11-2725

CA Aluminum Series Pressure Washer

CA Aluminum Series is excellent for cleaning contractors on the move. It’s lightweight, yet powerful enough to remove old peeling paint and clean the toughest stains from most surfaces. The pump is equipped with Mi-T-M pressure relief start, forged brass manifold, thermal relief valve and in-line water strainer. Corrosion-resistant aluminum frame Unit Includes: Quick connect nozzles – 0°, 15° and 25°, 50’ x 3/8” non-marking hose, and insulated trigger gun.

Call for Pricing


P11-2726

HSP Series Gasoline Direct Drive Pressure Washer

HSP series features a unique Electro Magnetic Firing (EMF) system and is great for removing grease, mud and muck. External bypass system protects from heat build-up. Preset stainless-steel and brass unloader valve. Forged brass manifold, thermal relief valve, and low-pressure detergent injector. Reinforced powder coated steel frame with center balanced lift and 13” flat-free tires. Temperature rise 150°F/66°C above ambient, maximum outlet temperature is 200°F. Unit Includes: Quick connect nozzles - 0°, 15°, 25° and 40°, 50’ x 3/8” steel wire-braided hose, and adjustable pressure insulated dual lance with trigger gun.

Call for Pricing


P10-2294

Shark DG Series Pressure Washer - 2,700 PSI

Gasoline-powered direct drive, cold water pressure washer with cleaning power of 2.5 GPM and 2,700 PSI. Pump is a high quality triplex , oil-bath style with a forged brass head and ceramic pistons. It carries a 7-year warranty. The engine is a 6.5 HP Honda GX series engine. 10-inch tubes pneumatic tires for easy maneuvering around the jobsite. The frame has an epoxy coated powder finish for all weather protection and carries a lifetime warranty. Includes 50 ft. of wire-braid hose, heavy-duty trigger gun, chrome-plated wand, and four stainless steel nozzles each with varying spray.

Call for Pricing


P10-2784

Shark DG Series Pressure Washer - 3,000 PSI

Gasoline-powered direct drive, cold water pressure washer. 9.0 HP Honda GX series engine producing up to 3,000 PSI at 3.0 GPM. Pump is a high quality triplex, oil-bath style with a forged brass head and ceramic pistons. It carries a 7-year warranty.  Also features an E-Z start valve that reduces compression for resistance-free pull starting. Includes 50 ft. of wire-braid hose, heavy-duty trigger gun, chrome-plated wand, and four stainless steel nozzles each with varying spray.

Call for Pricing


P10-2854

Shark HD Series Pressure Washer - 3,500 PSI

Reliable Honda GX engine with low-oil alert and silent-tone muffler. Safety thermal pump saver valve protects against hot-water damage by venting recirculated water. ¬ Insulated stainless steel wand with quick-couple connectors for easy attachment of high-pressure nozzles. 10" tubed pneumatic tires for easy maneuvering on all terrains and to absorb vibration. ¬ Rubber feet to absorb vibration and keep the unit from “walking”.  Convenient front and back 1 1/4” handles to assist in lifting and moving the pressure washer. Includes 50 ft. of wire-braid hose, heavy-duty trigger gun, chrome-plated wand, and four stainless steel nozzles each with varying spray.

Call for Pricing


P10-2789

Shark Hot Water Pressure Washer

Honda’s gasoline powered 11 HP engine (with electric start) powers this highest quality and most durable hot water pressure washer producing 3,000 PSI @ 3.5 GPM. The heating element can be run on diesel or fuel oil. Features Shark’s tri-plunger, oil-bath pump that carries a 7-year warranty. Thermal pump saver valve protects against hot-water damage by venting re-circulated water. The hot water coil is made of 1/2", Schedule 80 steel pipe and cold rolled for years of leak-free operation.The control panel is enclosed automatic thermostat, hour meter, and on/off switch. Mounted on a durable 1 1/4" steel chassis and protected by a steel roll cage. Four 13” pneumatic tires allow for easy maneuverability around the jobsite. Includes 50 ft. of wire-braid hose, heavyduty insulated trigger gun, rust-free polyethylene tank, and four stainless steel nozzles each with varying spray.

Call for Pricing




Results 1 - 7 of 7