TRASH CHUTES

Superchute® Replacement Parts

Superchute® Trash Chute System

High quality, durable debris chute systems designed for cleaning large volumes of construction debris directly into a container from buildings of all heights. Made from highly visible, yellow UV treated plastic resistant to abrasion, chemicals and cold (-156°F). Assembly is fast and easy; no tools required. Sections are connected to each other with 2 integral wire rope assemblies (2,000 lb. test - break over 10,000 lb.) to build chutes of any length. The Superchute® debris system is available in two styles - Wraparound® or Welded Sections and in a variety of sizes. Top hoppers and doors are also available. When correctly installed, the Superchute system meets or exceeds OSHA requirement 1926-252.


For any order over 10 chute sections, we can print your name & phone number for a minimal charge! Every chute section is printed twice in an 11" x 5" section. This is an excellent source of advertising, and a valuable protection against theft.

 



P31-0030

Superchute® Wraparound® System

This patented system can be “unwrapped” and laid flat, making this system easier to transport and store. Takes one minute to assemble and disassemble. Fully compatible with Superchute® Welded sections and top hoppers and doors. For roofers, two Wraparound chutes can be joined together to make a double diameter oversized chute! (For example, join two 30" diameter Wraparound chutes to make a 60" diameter chute.) Available in six different diameters and three thicknesses. All sections are 4' tall.

Call for Pricing


P31-0058

Steel Liners

If you will be removing heavy and abrasive debris, install a few steel liners in the parts of the chute that are more likely to wear. (For example, the last few chute sections curving into the container.) Steel Liners fit more Superchute Wraparound™ and Welded style trash chutes.

Call for Pricing


P31-0038

Superchute® Welded Top Hopper

The uppermost chute in a system; the entry point for debris. 3/16" thick chute body with 3/8" thick kickboards. Available in six diameters. Fully compatible with both Superchute Wraparound and Welded trash chutes.

Call for Pricing


P31-0039

Top Hopper Entry Cover

Entry cover physically blocks off entry hole of the hopper and can be padlocked for safety. The closeout is comprised of two plastic pieces that interlock.

Call for Pricing


P31-0050

Superchute® Welded Door Section

The entry point for debris at mid-level chutes. 3/16" thick chute body with 3/8" thick kickboards. Available in six diameters. Fully compatible with both Superchute Wraparound and Welded trash chutes.

Call for Pricing


P31-0051

Door Entry Cover

Entry cover physically blocks off entry hole of the door and can be padlocked for safety. The closeout is comprised of two pieces that interlock with a tab. The top piece covers the top of the opening while the front piece covers the entry opening.

Call for Pricing




Results 1 - 6 of 6