DRILL SCREWS



P15-6632

Bugle Head Grabber®

Attached gypsum board to wood with superior holding power.  Extra sharp point and threads make driving easier.  No 2 Phillips recess Bugle head, coarse thread.  GrabberGard® exterior grade coating

Call for Pricing


P15-0060

Fine Thread Drywall Screws

Sharp point, fine thread drywall screws attach gypsum board to 20-25 gauge steel. Black phosphate finish. Phillips bugle head, recessed.

Call for Pricing


P15-6522

Scavenger® Head Driller

Attaches gypsum, insulation board, wood, etc to metal studs 20-14 ga.  Unique Scavenger® head helps reduce paper burrs.  No 2. Phillips recess Scavenger® head, drill point.  Coating:  Clear zinc.

Call for Pricing


P15-6510

Wafer Head Driller

Attaches metal lath to 20-14 ga steel studs and framing.  No 2 Philips recess Water head, drill point.  Coating: Clear zinc.

Call for Pricing


P15-0080

Coarse Thread Drywall Screws

Hi-thread screws attach gypsum board to wood stud. Black phosphate finish. Phillips head, recessed.

Call for Pricing


P15-0100

Exterior Coarse Thread Drywall Screws

Same as Coarse Thread Drywall Screws but with a weather resistant “dacro-galvanized” coating. Resists corrosion.

Call for Pricing


P15-0120

Bugle Head Self Drilling Screws

Attaches gypsum board up to steel up to 12 gauge thick. Black phosphate finish. Phillips head, recessed.

Call for Pricing


P15-1015

Pan Head Sharp Point Screws

Attaches steel stud to steel track up to 20 gauge. Black phosphate finish. Recessed phillips head.

Call for Pricing


P15-0132

Pan Head Self-Drilling Framing Screws

Also called “peanut screws”. For attaching steel stud to steel track up to 12 gauge thick. Ideal for fastening electrical boxes to steel stud. Phillips, Pan head.

Call for Pricing


P15-0119

Pan Head Self-Drilling Screws

Attaching steel strapping (Bridging) or Furring channel to steel joist. Recessed Phillips head. Zinc Finish.

Call for Pricing


P15-1018

Wafer Metal Lath Sharp Point Screws

Attaches metal lath or facing up to 20 gauge stud. Zinc finish for corrosion resistance. Phillips recessed head.

Call for Pricing


P15-1023

Wafer Metal Lath Self-Drill Screws

Attaches metal lath or facing up to 20 gauge stud. Zinc plated finish. Phillips recessed head.

Call for Pricing


P15-9011

Trim Head Sharp Point Screws

Finishing screw for fastening trim and base board to metal and wood studs. Black phosphate finish. Use #1 Robertson Bit (Item #10-3916) to drive Trim Head Screws.

Call for Pricing


P15-9016

Trim Head Self-Drilling Screws

Finishing screws for attaching wood trim or base to 14-20 gauge metal studs. Zinc finish. Use #1 Robertson Bit (Item #10-3916) to drive Trim Head Screws.

Call for Pricing


P15-0294

Hex Washer Head Sheet Metal Screws

Also known as sharp or needle point screws. Available with a slotted hex head for use with a 1/4” socket or slotted screwdriver. Zinc Finish

Call for Pricing


P15-0162

Hex Washer Head Self-Drill Screws

Also called “Tek Screws”. Attaches back-up plates, fixtures, door frames and lathers channel to structural studs and metal decks up to 12 gauge. Zinc finish. Hex head designed to be used with nut driver.

Call for Pricing


P15-6060

Stainless Steel Hex Tek Screws (Self-Drill) 410 Stainless Steel

Also called “Tek Screws”. Attaches back-up plates, fixtures, door frames and lathers channel to structural studs and metal decks up to 12 gauge. 410 SS. Hex head designed to be used with nut driver.

Call for Pricing


P15-0180

Thin Wafer Plymetal Self-Drill with Wings

For attaching of plywood or composite to metal. Wings are used to ream out wood when drilling. Zinc finish. Phillips recessed.

Call for Pricing


P15-0182

Hex Head Construction Screw (Self-Drill)

#4 point will drill metals up to 3/8" thick. #5 point will drill through metals up to 1/2" thick.

Call for Pricing


P15-0186

Flat Head Header with Wings

For attaching 2 x 4 or furring to steel. Zinc finish. Phillips recessed head. #4 point. Zinc finish.

Call for Pricing




Results 1 - 20 of 20