HEAD PROTECTION

Custom Printed Hard Hats


Have your logo custom printed onto any of our hard hats to your specifications. Multi-color printing available. Colony offers custom printed hard hats by Bullard, MSA, and Fibre-Metal. Ask your Colony representative for more details.  800-698-0781

 

Hard Hat Care


Your Checklist


• Make sure your hat fits right. There should be approximately 1" between the harness and the shell so air can circulate and keep your scalp cool. If your hat is too loose, it will fall off when you bend over. Too tight and it may cause headaches.


• Wear a color-coded hat if you need identification. Don't paint or scratch your hard hat to identify it.


• Add light-attracting tape to your hat if you work at night or in darkness. This will make it easier for others to see you.


• Inspect your hard hat every day. Look for gouges and cracks. Check for frayed or broken sweatbands and straps.


• Carry cigarettes or other personal belongings somewhere other than in your hat.


• Clean the shell of your hard hat at least once a month to remove oil, grease, chemicals and sweat. Soak it for five minutes in mild detergent and water that's at least 140°F (60°C). Then wipe the hat and let the air dry it. Clean the hat according to the instructions provided.


• Take good care of your hat; don't drop it, throw it or drill holes in it.


• Sunlight and heat can rot the harness and straps. Don't leave your hard hat on the front or back window ledge of your car.



P14-2910

WaveCel T2+ Pro Non-Vented Full Brim Helmet w/ Chinstrap

Unprecedented safety in a low-profile, cool, and light-weight helmet. The T2 + PRO helmet has accessory rail as well as standard earmuff slots. It is non-vented to comply with Class E electrical rating requirements. WaveCel technology provides exceptional protection from top and side impacts. This helmet exceeds ANSI Z89.1, Type II, class E requirements. Chin Strap included. Made in the USA.

Call for Pricing


P14-2900

WaveCel T2+ MAX Vented Full Brim Helmet w/ Chinstrap

Unprecedented safety in a low-profile, cool, and light-weight helmet. The T2 + MAX helmet has top and rear vents, accessory rails as well as standard earmuff slots. WaveCel technology provides exceptional protection from top and side impacts. This helmet exceeds ANSI Z89.1, Type II, class C requirements. Chin Strap included. Made in the USA.

Call for Pricing


P14-2776

Traverse™ Industrial Climbing Helmet with Mips® Technology

Ultra lightweight shell made with ABS material provides superior protection. Mips® (Multi-directional Impact Protection System) is a low frictional layer designed to reduce rotational motion transferred to the head from angled impacts. EPS foam impact liner helps absorb the forces of front, side, or rear impacts. Includes a 4-point cross-over chin strap with quick release buckle that is adjustable for a safe and secure fit. Rugged non-slip adjustable SURE-LOCK wheel ratchet ensures proper suspension performance and effortless fit for all head sizes. Inner suspension includes comfortable padding for above the brow line. Available in vented and nonvented.

Call for Pricing


P14-2780

Traverse™ Eye Shield with Quick Connect System

Complies with ANSI Z87+. Polycarbonate material offers anti-scratch/anti-fog protection.

Call for Pricing


P14-0039

Hard Hats

Features a 4-point pin-lock suspension with the helmet made of high density polyethylene. Meets ANSI Z89.1-2009 Standards, Type 1, Class C, G, &E. Rain trough on sides and back of helmet channel moisture away. Universal accessory slots fit cap mounted ear-muffs and chin straps. Soft brow pad is replaceable and washable. Available in Ratchet Style suspension. Economically priced.

Call for Pricing


P14-0033

HARD HAT ACCESSORIES

Call for Pricing


P14-2850

White Hard Hat - Visitor

Includes an imprint of "Visitor" on front of hat. Features a four-point ratcheting suspension with the helmet made of high density polyethylene. Meets ANSI Z89.1 Standards, Type 1, Class C, G, & E. Universal accessory slots fit cap mounted ear-muffs and chin straps.

Call for Pricing


P13-9120

MSA V-Gard® Hard Hats

Comfortable, lightweight, and excellent quality hard hat that has become an industry standard. Made from a polyethylene shell and suspension system that works together to provide excellent protection. Choose from MSA’s strap adjustable Staz-On® or ratchet style Fas-Trac® suspension. Many other styles and colors of V-Gard Hard Hats available, as well as custom-printed MSA hard hats. Ask your sales representative for a complete listing.

Call for Pricing


P13-9132

V-Gard® Replacement Suspensions

If you already have a V-Gard hard hat and simply need a new suspension. Suspensions sold individually.

Call for Pricing


P13-9119

MSA V-Gard™ Hard Hat with Full Brim

Full Brim Style with Polyethylene shell provides superior impact protection with self adjusting crown straps for a comfortable fit.  Fas-Trac® suspension.  Color: White.  Custom imprinting available.

Call for Pricing


P13-9138

MSA Skullgard® Hard Hats

The Skullgard® helmet is designed to withstand elevated temperatures associated with working in steel mills and other heavy industries. However, contractors like this hard hat for not only its comfort, but its unique Natural Tan textured color and feel. Available in two styles: standard cap style and full brim. Both styles come with MSA’s Fas-Trac® Ratchet Suspension. Color: Natural Tan.

Call for Pricing


P13-9183

MSA V-Gard® H1 Safety Helmet

The V-Gard® H1 Safety Helmet provides exceptional comfort and ease of use in a stylish low-profile hard hat design. Fas-Trac® III Pivot Ratchet Suspension for superior comfort, adjustability, and range of motion. Non-contact foam liner maximizes air flow and breathability for optimal cooling and hygiene. Field replaceable 4-point chinstrap with multiple adjustment points for customized fit and comfort. Patent pending “push-button” accessory attachment rail and universal lighting clips for quick installation and removal. Convenient rescue whistle integrated into the chin strap buckle. Standard reflective trim. Vented.

Call for Pricing


P13-9184

MSA V-Gard H1 Clear Faceshield

Clear polycarbonate contoured visor for closer fit and optimal resistance to impact and splash hazards. Simple push button donning and doffing on the V-Gard H1 Safety Helmet; no additional frames or adapters required. Dual pivot hinge maintains a low profile to the helmet when stowed for improved balance and wind resistance Frameless design with anti-fog and anti-scratch coatings for greater visibility. ANSI/ISEA Z87.1-2015 + D3*.

Call for Pricing


P13-9135

MSA Faceshield

Compatible with Slotted V-Gard caps (which Colony sells and stocks). Add this to your V-Gard Hard Hat, and you are now protected against small flying objects, abrasive particles, and chemical splashes. The frame comes with mounting brackets, positive positioning joints, and lockdown device. Clear faceshields (8" x 16") are sold separately, and not included when purchasing the faceshield frame.

Call for Pricing


P13-9185

MSA V-Gard H1 Clear Half-Face Spectacle

Clear polycarbonate contoured spectacles for closer fit and optimal resistance to impact and splash hazards. Simple push button donning and doffing on the V-Gard H1 safety helmet; no additional frames or adapters required. Dual pivot hinge maintains a low profile to the helmet when stowed for improved balance and wind resistance. Frameless design with anti-fog and anti-scratch coatings for greater visibility. ANSI/ISEA Z87.1-2015 +.

Call for Pricing


P13-9947

Patterned Full Brim Hard Hat

Shell constructed from ABS materials.  4-Point ratchet suspension is easy to adjust and allows the wearer to modify the fit while wearing hard hat. Soft brow pad is replaceable. Replaceable suspensions and headbands also available.  Meet ANSI Z89.1 Standards, Type I, Class C, G, and E.

Call for Pricing


P13-9945

Patterned Cap Style Hard Hat

ABS material is strong, yet ultra-light for seemingly weightless protection.  Low profile design offers a low center of gravity for better balance.  Rear padded suspension provides additional level of comfort on the wearers’ neck.  4-position harness points allows you to move the harness forward, backward, up or down – allowing for the most optimal position for ultimate comfort.  Replaceable sweatband and ample space for you to promote your company’s logo or message on the hard hat.

Call for Pricing


P14-4000

Fibre-Metal Fiberglass Caps

These popular hard hats are made of a custom blended material built for toughness and durability. Comfortable, lightweight. Ratchet Style suspension. Comes with Quik-Lok® mounting blocks for fast and easy attachment of faceshields and welding helmets.

Call for Pricing


P10-0233

Fibre-Metal Full Brim Fiberglass Hard Hat

Full brim design for added protection against environmental elements such as sun, rain and snow, as well as, work site hazards including overhead debris.  These popular hard hats are made of a custom blended material built for toughness and durability. Comfortable, lightweight. Ratchet Style suspension. Comes with Quik-Lok® mounting blocks for fast and easy attachment of faceshields and welding helmets.  Meets ANSI Z89.1-2014 and CSA Z94.1*2015 Type I Class G.

Call for Pricing


P18-0029

Milwaukee Front Brim Safety Helmet - Type 2

Milwaukee Type 2 front brim safety helmets deliver you better protection and more comfort. These safety helmets offer protection from top and side impacts. These construction safety helmets are BOLT™ compatible with four BOLT™ accessory slots and two universal accessory slots. Includes a MILWAUKEE® BOLT™ Headlamp Mount that works with most headlamps for easy, secure attachment, and a BOLT™ Marker Clip allows for easy access to pens and markers. The Milwaukee helmets have a comfortable padded suspension that includes an adjustable swinging ratchet for better comfort. The climbing style helmet also has a comfortably fitting five adjustable buckle chinstrap for better security. An antimicrobial sweatband and helmet liner prevent odor and bacteria build up and are removable and machine washable. These safety helmets are ANSI type 2.  Available in vented and nonvented.

Call for Pricing


«« Start « Prev 1 2 Next » End »»

Display Results per Page

Results 1 - 20 of 35