BOSCH HIGH PRODUCTION ROUTER BITS



P85-4250

Straight Bits - Single Flute, Plunge Cutting.

Single Flute, Plunge Cutting.

Designed for roughing operations where high-production feed rates are essential. Optimum chip clearance. Specially designed tip for fast plunge cutting.

Call for Pricing


P85-6130

Straight Bits - Two Flutes, Plunge Cutting.

Two Flutes, Plunge Cutting.

Designed to give excellent smoothness of cut and balanced cutting, with minimal vibration. Positive hook angles for efficient cutting. Strong webbing and heavy cutter backing give superior bit life. Specially designed tip for fastplunge cutting.

Call for Pricing


P85-6800

Straight Bits - Two Flutes, Top Bearing Mounted

For use when lettering, plunge cutting, grooving, and templet cutting from above and below workpiece.

Call for Pricing


P85-6150

Rabbeting Bits - Two Flutes, Ball Bearing Pilot

Two Flutes, Ball Bearing Pilot


For fast, smooth, rabbeting cuts without use of router guide.

Call for Pricing


P85-2980

Chamfering Bits - Two Flutes, Ball Bearing Pilot

For beveling and decorative edging.

Call for Pricing


P85-2890

Roundover Bits - Two Flutes, Ball Bearing Pilot

For smooth, uniformly rounded edges. Lower depth setting produces rounded corner with decorative bead.

Call for Pricing


P85-6320

Edge Beading Bits - Ball Bearing Pilot

Versatile bit adds attractive edging on new pieces and matches many older molding cuts for remodeling work.

Call for Pricing


P85-4440

Core Box Bits

Cuts rounded grooves used in a variety of applications ranging from doors to columns.

Call for Pricing


P85-2190

V-Grooving Bits - Two Flutes

Two Flutes

Excellent for door front grooving, lettering, and sign work. Shear angle cutter geometry for smooth, efficient cutting.

Call for Pricing


P85-2380

Hinge Mortising Bits

Fast-cutting bit for making mortises when work is started at the edge. Smooth finish cut makes this bit ideal for surfacing operations. Also used where good chip clearance is important in materials such as gummy wood. Cuts mortise for hinge butts with 5⁄8" corner radius. Will cut entire mortise in one pass. Purchase shank separately.

Call for Pricing


P85-2680

2-Flute Laminate Flush Trimming Bits - Ball Bearing Pilot

Ball Bearing Pilot


For fast, smooth, accurate trim cuts. Shielded, compact ball bearing pilot.

Call for Pricing


P85-6020

3-Flute Trimming Bit - Ball Bearing Pilot

Ball Bearing Pilot


Extra smooth cuts; for laminate trimming and trim cuts on heavier work when cutting using a templet. Can be used with two ball bearings to widen bearing surface and reduce templet wear.

Call for Pricing


P85-2160

3-Flute Laminate Flush Trimming Bit

Ball Bearing Pilot


Gives chatter-free production trimming with extra smooth, flush trim cut. Compact ball bearing assembly is equipped with glue shield.

Call for Pricing


P85-4200

Flush And Bevel 3-Flute Laminate Trimmer Assemblies

Ball Bearing Pilot


For extra smooth production trimming. Assembly includes arbor, replaceable 3-wing cutter, and ball bearing. A favorite bit in high-production shops for years.

Call for Pricing


P85-2850

Flush Trimmer Bit

Makes flush, trim, edge cut. Self-pilot.

Call for Pricing




Results 1 - 15 of 15